My engine is too big for the a/c does anyone know a solution?

67_Ellie

New Member
Jun 11, 2018
12
0
1
texas
so a while back I got a 67 mustang and I have done a ton of restomod work to it, an issue i'm facing is the engine is too large for the ac to fit in the engine bay (and it gets 114 F in the summer)
 

Attachments

  • ENGINE67.jpg
    ENGINE67.jpg
    122 KB · Views: 177
  • Sponsors (?)


I put a 98 Cobra engine in my 69 Mach, built my own hoses. Can take pictures if youd like. Are you using he stock Ford heater/a/c box? I have a classic auto air in mine. I made my hoses by using a stock 2000 GT manifold hose off the compressor and fabbed everything else. I had to cut the manifold liquid line to the condenser.
 

Attachments

  • D0C6EC9F-BA86-44FB-9661-5B0F8C368FFA.jpeg
    D0C6EC9F-BA86-44FB-9661-5B0F8C368FFA.jpeg
    343.6 KB · Views: 156
  • 070342BE-D518-4E3B-9549-C58414CED635.jpeg
    070342BE-D518-4E3B-9549-C58414CED635.jpeg
    260.4 KB · Views: 163
when you do these mods, i suggest going the vintage air route. the stock location is a tight spot for a 4.6. I ran ez-clip ( its expensive) all of it via the fender well.
 

Attachments

  • IMG_1117.jpeg
    IMG_1117.jpeg
    372.4 KB · Views: 136
  • IMG_1116.jpeg
    IMG_1116.jpeg
    274.4 KB · Views: 121
  • IMG_1115.jpeg
    IMG_1115.jpeg
    314.5 KB · Views: 130