• Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
  • 2005 - 2009 Specific Tech

my exhaust sounds like sh** wtf

  • Thread starter Thread starter browning_1
  • Start date Start date Apr 5, 2009
B

browning_1

New Member
Mar 30, 2009
27
0
0
columbus, ohio
Apr 5, 2009
#1
  • Apr 5, 2009
  • #1
Ok friday night i installed my o/r bassani xpipe, and i have the borla aggressive exhaust, it sounded great with the stock hpipe but just wanted it to be a little louder, i heard that the bassani o/r x and the borla exhaust was a good combo, well we installed everything and started it up and it is as raspy as it gets and it makes a god awful sound when u rev it up and let off sounds like trumpets playing or something, and the tone of it isnt deep at all and its really high pitched and has a real bad tin can sound (if that makes any since) at about 3000 rpm. ive heard alot of people have this setup and they say it sounds awesome, there is no way anyone in their right mind would think my car sounds good, any suggestions? could i have done something wrong? and yes i did take it to a muffler shop to have everything checked for leaks, sorry for the ranting just sick to my stomach
 
S

ski

Member
Dec 14, 2004
380
2
18
Apr 5, 2009
#2
  • Apr 5, 2009
  • #2
X-pipes tend to sound more raspy, and H-pipes more throaty. Perhaps the reviews you read were from owners that liked a raspy sounding exhaust.
However, this may make you feel better about your selection => X-pipes are claimed to make more power in the upper rpm range.
 

autumn_again

New Member
Oct 2, 2007
356
0
0
Hamilton, NJ
Apr 5, 2009
#3
  • Apr 5, 2009
  • #3
get some resonators welded in, or some high flow cats. my favorite pipe i've ever heard for these cars are the bassani catted X. nice and deep but still have that throatyness to it.

with cats on it'll still be louder then the stock pipe.

friends got a catted X from BBK and its way too raspy for my taste.
 

05wolfkiller

Member
Sep 4, 2006
114
0
16
pearland, texas
Apr 5, 2009
#4
  • Apr 5, 2009
  • #4
browning_1 said:
Ok friday night i installed my o/r bassani xpipe, and i have the borla aggressive exhaust, it sounded great with the stock hpipe but just wanted it to be a little louder, i heard that the bassani o/r x and the borla exhaust was a good combo, well we installed everything and started it up and it is as raspy as it gets and it makes a god awful sound when u rev it up and let off sounds like trumpets playing or something, and the tone of it isnt deep at all and its really high pitched and has a real bad tin can sound (if that makes any since) at about 3000 rpm. ive heard alot of people have this setup and they say it sounds awesome, there is no way anyone in their right mind would think my car sounds good, any suggestions? could i have done something wrong? and yes i did take it to a muffler shop to have everything checked for leaks, sorry for the ranting just sick to my stomach
Click to expand...

It only sounds like crap from the inside. I was seriously thinking about changing my bassani system out until someone told me it sounded really good.
So I let a friend drive my car (reluctantly) and it sounds totally different. I know what you mean abt that high pitched tin can sound. I hate it. But at WOT, go**amn it sounds awesome. Listen to it while someone else drives it first if you already haven't before you give up on it. Good Luck
 
B

browning_1

New Member
Mar 30, 2009
27
0
0
columbus, ohio
Apr 5, 2009
#5
  • Apr 5, 2009
  • #5
thanks alot for the feedback, the sound is ok but it cackles when u let off of it and sounds like a 80's f150 with holes in the exhaust lol, guess im just used to deep throaty sounds, any suggestions on a new setup if i decide to sell this one?
 

TBrad

New Member
Feb 15, 2009
91
0
0
Dallas, Texas
Apr 5, 2009
#6
  • Apr 5, 2009
  • #6
Headers?
 

06bluegt

New Member
Mar 20, 2009
46
0
0
Circleville, Ohio
Apr 6, 2009
#7
  • Apr 6, 2009
  • #7
ive heard headers get rid of the trumet sound...myself im one of the guys that like the raspy sound but ive been around racing all my life and open headers and such is what ive came acustomed too...but everyone likes different sounds...imo the 302 shorties o/r h-pipe and flowmasters sounded the best for that deep sound...but the 4.6 are a whole new beast....
 

gashog

Member
Dec 26, 2006
139
0
16
Fresno, CA
Apr 6, 2009
#8
  • Apr 6, 2009
  • #8
Which borla's are these? Not the stingers?

I have an O/R prochamber and stingers and this thing rumbles... like setting off car alarm rumbly. No trumpeting whatsoever.
 
B

browning_1

New Member
Mar 30, 2009
27
0
0
columbus, ohio
Apr 6, 2009
#9
  • Apr 6, 2009
  • #9
yea its the stingers, you would just have to hear it i guess, the only way to describe it is like a tincan with bb's in it when it revs up, kinda sounds like my buddies old v6 ford probe with strait pipe lol, it was nice and deep without the x pipe, did you hear your borlas before you installed the prochamber? or did you do them both at the same time?
 

gashog

Member
Dec 26, 2006
139
0
16
Fresno, CA
Apr 7, 2009
#10
  • Apr 7, 2009
  • #10
browning_1 said:
yea its the stingers, you would just have to hear it i guess, the only way to describe it is like a tincan with bb's in it when it revs up, kinda sounds like my buddies old v6 ford probe with strait pipe lol, it was nice and deep without the x pipe, did you hear your borlas before you installed the prochamber? or did you do them both at the same time?
Click to expand...

I heard the stingers several times before I bought mine and really liked them. I already had the prochamber installed and it sounds great by itself just not loud enough for my tastes. When I eventually found a great deal from a forum member here I bought a set and never looked back. The sound is amazing.

I know the sound you describe, it's the x-pipe that's causing it. Get rid of it and get yourself an H or a prochamber. Just my .02
 

rugedraw

New Member
Oct 12, 2004
47
0
0
Miami, FL
Apr 7, 2009
#11
  • Apr 7, 2009
  • #11
I had the same issue with my off-road h-pipe and FlowMasters. The headers eliminated the trumpet sound completely. Also, it made the ride MUCH smoother. I found that the un-catted exhaust made the car vibrate.

The headers made it sounds better, and feel better.
 
You must log in or register to reply here.

Similar threads

U
8 Years of Vibration leading to engine knock?
  • UpgradeXP
  • Apr 14, 2025
  • SN95 V6 Mustang Tech
Replies
3
Views
468
SN95 V6 Mustang Tech Apr 14, 2025
Noobz347
Drivetrain Why does my AOD make a 'whirrring sound' when in gear?
  • evintho
  • Feb 7, 2025
  • Fox 5.0 Mustang Tech
Replies
9
Views
662
Fox 5.0 Mustang Tech Feb 15, 2025
evintho
S
Fuel ‘88 GT Runs Rich Cold — Fixes Itself When I Unplug Sensors (ECT, MAF, O2, etc.)
  • Sufarry
  • Nov 6, 2025
  • Fox 5.0 Mustang Tech
Replies
12
Views
858
Fox 5.0 Mustang Tech Nov 9, 2025
Mustang5L5
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
3K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
M
Progress Thread mkk50's Progress Thread
  • mkk50
  • Aug 4, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
19
Views
761
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 22, 2025
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
  • 2005 - 2009 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?