my major help me thread

fivespeedsteed

20+ Year Stangneter :roc</strong><span class=
Oct 17, 2003
748
22
69
Richmond, VA
ok so im really behind getting stuff done on my car. im really angry right now becasue of a bunch of crap so sorry about the crap spelling and stuff.

i took off my driver door panel today. both windows shake squeak and rattle around when you put them op or down. what do i need to fix that. i took the pannel off and moved the felt brush thing in and it helped a little but it still does it.

changing the fuel filter soon, can i just undo the clips and replace it, how much fuel will come out? i dunno where the fuel pressure release is....

mainly the windows shakeing is whats bothering me, and any advice on that would be great.
 
Just hold your head against it. Problem solved :nice:

Actually, I was wanting to know the same with the window thing. The window on my driver's side rattles slightly went going at speeds higher then 60mph or so.
 
Are the window mounts loose on the track?

The Schrader valve is on the fuel rail. Be very careful when relieving pressure because you get a fair amount of fuel coming out. If you have a diagnostic FP gauge, you can use it to release the pressure into a container in a safer fashion.

Good luck.
 
no i checked all bolts i could see. they all were pretty snug, but they tightened a little. it looks to me like the bar the runs up and down that the guide runs on isnt lubed enough. theres a hard plastic square gromment around it. could that be the culprit?
 
no i checked all bolts i could see. they all were pretty snug, but they tightened a little. it looks to me like the bar the runs up and down that the guide runs on isnt lubed enough. theres a hard plastic square gromment around it. could that be the culprit?

you can flip that hard metal plastice grommet but usally when it is worn you windo doesn't move up and down square it wants to tip forward or backwards.