My mod motor turbo build

AllFordPerf · Dec 14, 2006

cubicgator said:
now maybe you can beat the 11.20 i ran in the coupe 4 years ago bitch

love wally

just kidding you make me so proud my little jr fab master

I will beat it by a full second or lighten up the car trying.

Jon · Dec 15, 2006

That looks good Jeff! I look forward to seeing it in person next week.
You (or any others looking for hi temp coating can check out this:
View attachment 416987
"Apply Design Engineering's silicone coating directly to exhaust manifold, pipe, and muffler surfaces to protect them against acid rain, snow, salt, solvents, and weather extremes. It withstands temperatures of up to 1,500 degrees F, and even helps prevent pipe wrap from deteriorating."

I used it on my exhaust housing and it holds up very good compared to anything else I've used. They recommend baking it on so I just ran my car for a few minutes at first to get it hot then let it sit. I did that a couple times and it was good. It won't last forever, but so far I've got no rust.

charged9250 · Dec 15, 2006

Jon said:
That looks good Jeff! I look forward to seeing it in person next week.

Whats next week?

ASD · Dec 15, 2006

charged9250 said:
Whats next week?

The KKP vs AFP Street drags. We volunteered your car against his new turbo set up. Didn’t Jon tell you??

WaterPog · Dec 15, 2006

I think I may be able to get ahold of some injectors by then

Lookin' real good Jeff, can't wait to see it go down the track this spring.

charged9250 · Dec 15, 2006

ASD said:
The KKP vs AFP Street drags. We volunteered your car against his new turbo set up. Didn’t Jon tell you??

Lets do it.. Tune that sucker with some race gas and see what it will do!! Down with the turbo boys!! Eaton..... I mean vortech all the way!!! hehehe

ddonaca351 · Dec 16, 2006

Stangler said:
Looks really good!!! Did you just paint the hot side? I'm looking to find a good coating place.
I've seen 2.5 lbs on mine, and I don't even have wheels on it!!

Nate

Ive used russ meaks / meeks down on hwy99 in P-town. (not far from "the bomber") It was like 250 for a set of headers inside/out, came out real nice. He does silver or black, the black has a higher max temp.

DD

breakemlose · Dec 16, 2006

quote The KKP vs AFP Street drags. We volunteered your car against his new turbo set up. Didn’t Jon tell you??

yes definatley... jon get your damn transmission fixed i want my dream car on the road!!

Jon · Dec 16, 2006

breakemlose said:
quote The KKP vs AFP Street drags. We volunteered your car against his new turbo set up. Didn’t Jon tell you??

yes definatley... jon get your damn transmission fixed i want my dream car on the road!!

Since you are heckling me I have this for you:

http://www.speedaddiction.com/Videos/Street/CobraSupradig2.wmv

MyFordsFly · Dec 16, 2006

Looks great! Now you just need to get an Auto in that thing.

Bill-it · Dec 16, 2006

Looks great, Jeff.

AllFordPerf · Dec 19, 2006

After a carpenters square and tape measure alignment I finally got to drive the car yesterday. The snow and Ice cleared up enough to go for a few mile drive. It's kinda loud with just the down pipe but I can live with it untill I can get it up on a lift to finish the exhaust. I don't have a boost gauge or wide band hooked up yet so I took it easy but for a larger turbo it comes into boost sooner than I thougt. Feels like it will be quite the punisher. I may leave the stick untill race season starts. It's fun to drive with the stick.

Stangler · Dec 19, 2006

Congrats again man. That setup looks great. I'll try to take it easy on ya in spring though. I'm heading out to New York on friday for the holidays, but when I get back I'll be driving mine around.:SNSign:

Nate

Stangler · Dec 19, 2006

ddonaca351 said:
Ive used russ meaks / meeks down on hwy99 in P-town. (not far from "the bomber") It was like 250 for a set of headers inside/out, came out real nice. He does silver or black, the black has a higher max temp.

DD

Thanks, I'll give him a call.

Nate

ddonaca351 · Dec 22, 2006

Stangler said:
Thanks, I'll give him a call.

Nate

Oh for what it's worth... his wife kinda runs the "front office" (if you can call it that) anyhow I think she quoted me like 350 to start, but I stood and BS'd with her for awhile when I dropped them off, and then stood and talked with her again when I came back to pick them up (asked about all the pics on the walls, kept saying what nice work they do, etc...), and then when she rang it up, it was alott less than quoted. Just fyi....

Dave-

Stangler · Dec 22, 2006

ddonaca351 said:
Oh for what it's worth... his wife kinda runs the "front office" (if you can call it that) anyhow I think she quoted me like 350 to start, but I stood and BS'd with her for awhile when I dropped them off, and then stood and talked with her again when I came back to pick them up (asked about all the pics on the walls, kept saying what nice work they do, etc...), and then when she rang it up, it was alott less than quoted. Just fyi....

Dave-

I'll put the moves on her, don't worry. My wife said, "What ever brings the price down."

Nate

My mod motor turbo build

AllFordPerf

New Member

Jon

charged9250

ASD

Banned

WaterPog

charged9250

ddonaca351

Active Member

breakemlose

Jon

MyFordsFly

Bill-it

New Member

AllFordPerf

New Member

Stangler

A.K.A. Mr. Hankey

Stangler

A.K.A. Mr. Hankey

ddonaca351

Active Member

Stangler

A.K.A. Mr. Hankey

Similar threads

My mod motor turbo build

New Member

Banned

Active Member

New Member

New Member

A.K.A. Mr. Hankey

A.K.A. Mr. Hankey

Active Member

A.K.A. Mr. Hankey

Similar threads

Privacy & Transparency

Privacy & Transparency