my stang's power?

[68stang351]

this is how i type n this keyboard is messed up but if people cant take it seriously i guess they can shuv it cuz if you cant take it seriously then thats fine this site is a waste of time i guess. this isnt ****n english i can type however but watever im done on this site then thanks for ruining it!! i thot highly of people that cud talk to me bout mustangs cuz i dont have that kinda help but it dont ****n matter now peace out

Take it easy man. It's just that it makes it hard for us to read your post. My head hurts after reading that. That makes me less inclined to read the whole post, let alone offer advice. How can you expect advice if no one knows what you're talking about? People usually read the first couple of lines and stop there and go to the next thread.

We're just trying to be helpful. I can promise you that you will get more advice if you would just type in a way that people can actually read the whole post.

 

[kylem40]

well its just stupid that im being told to spell n not shortn my words when im so used to texting on my phone and half the time im on my phones internet typing these n when I first asked the question the only word I shortened was no that was it n you guys act like im an idiot sry my phone is set on t9 when im typing my bad

 

[kylem40]

most the time I don't realize im typing like that but my question wasn't hard to understand

 

[66sprint6]

most the time I don't realize im typing like that but my question wasn't hard to understand

Either type right or stop typing man, end of story. This isnt a text message, its a forum where we like to read and type as legibly as possible. I cant spell the best and my grammar may be weak, but I try my best to get the point across as legibly as possible. Dont think its a personal attack, simply a suggestion to help us understand and better respond to you. Keep up the attitude and text style typing and Im afraid you wont get anything but made fun of on here...hell, any forum you go to. This is a very very good and informative forum with alot of knowledgeable members, so wise up, type right and ask all the questions you got and see that they dont get answered. Oh...and its the internet, you cant let the goofballs get you all butthurt so easily!
Matt

 

[stykthyn]

butthurt LOL ^^^^

 

[dls322]

What a D-bag......demands information, then when he's spelling like he's in the 3rd grade he takes offense when someones asks politely to slow down and spell his words correctly. Total D-Bag


crapola

 

[Mustang5L5]

this is how i type n this keyboard is messed up but if people cant take it seriously i guess they can shuv it cuz if you cant take it seriously then thats fine this site is a waste of time i guess. this isnt ****n english i can type however but watever im done on this site then thanks for ruining it!! i thot highly of people that cud talk to me bout mustangs cuz i dont have that kinda help but it dont ****n matter now peace out

Kyle, relax. No need to get so defensive. I don't think Quick91 meant anything personal by it. He was correct in stating that clearer posts will help you get better responses.

Now if you feel that the extremely knowledgable people here are a "waste of time" because they are seeking more info from you, then i don't know what you were expecting here. Either way, your outburst is a little excessive and uncalled for.

 

[FrankenStang]

Mustang5L5 has the typing issue covered, now on to this...

What a D-bag......demands information, then when he's spelling like he's in the 3rd grade he takes offense when someones asks politely to slow down and spell his words correctly. Total D-Bag


crapola

Not typing correctly is more acceptable than posts like this. You've been here since 2005. You should know better by now.

Personal insults are against http://www.stangnet.com/mustang-forums/685806-stangnet-terms-service.html.

* While debating and discussion is fine, we will not tolerate rudeness, insulting posts, personal attacks or purposeless inflammatory posts. Our decision is final in these matters.

 

[FastDriver]

[tough guy voice] Yeah! [/tough guy voice]

 

[kylem40]

ok so im sorry for being stupid about the hole ordeal i understand you guys are trying to help im sorry ill try my best on the spelling n all that im not that great but i just didnt see wat the big deal was when i asked the question it was just no instead of know like i know people can understand that but ill try my best im not that great but i just didnt realize at first i was using my texting style rather then spelling it out like writing but i dont shorten words like one person replied where they said thnkn an iz n all that i dont do that i know that much but for all those that where helping me im sorry for those that where using smart ass coments you werent any better then me being foolish. and yes this is a very good sight because it helped me get my car running but sorry to all of you that were tryn to help me

 

[QUICK91LX]

ok so im sorry for being stupid about the hole ordeal i understand you guys are trying to help im sorry ill try my best on the spelling n all that im not that great but i just didnt see wat the big deal was when i asked the question it was just no instead of know like i know people can understand that but ill try my best im not that great but i just didnt realize at first i was using my texting style rather then spelling it out like writing but i dont shorten words like one person replied where they said thnkn an iz n all that i dont do that i know that much but for all those that where helping me im sorry for those that where using smart ass coments you werent any better then me being foolish. and yes this is a very good sight because it helped me get my car running but sorry to all of you that were tryn to help me

Being that I was the first one to say something I will definitely say that I know where you get your typing habits from, and my post was only to point out that you will get more help and better responses when your posts are easy to read when passing over relatively quickly. Some of our resident old coots will sometimes even point out that they won't waste their time if they cant catch the message the first time through and I was trying to help you avoid situations like that in the future. This isnt a chat room and this isnt in real time so you can take your time to write out your posts as well as you can before posting, and in the long run it will work out better for you. For real. Promise.

 

[Mustang5L5]

Okay, back on topic everyone

 

[stykthyn]

i feel old.... ho block and trickflow top end for the win

 

[Gearbanger 101]

Okay, back on topic everyone

You know...after sifting through all this garbage and trying to make sense of some of these posts, I completely forgot what it was?!?

Something about liking a Truck engine with a holley carb on it?

Was there actually a legitimate question in there somewhere that hasn't been addressed?

Difference between HO and Truck engine

Pistons, cam, intake. Everything else is essentially the same. The truck block is already drilled and machined for the roller cam. Its really just a matter of swapping out the above mentioned items and getting the right distributor gear?