• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

My tach doesn't work also

  • Thread starter Thread starter jhonda
  • Start date Start date Sep 6, 2007

jhonda

Member
Jul 22, 2003
125
1
16
Huntersville NC
Sep 6, 2007
#1
  • Sep 6, 2007
  • #1
I bought a sunpro 2" tach. I hooked the green wire to the coil, red wire to the pos. side of the batterie and the black wire to the neg side. When ever I do this my car will not start, after I take it off it will fire right up.....any ideas?
 

Bottomlesspit

I started the longest tech thread in the known uni
Founding Member
Jan 1, 1999
2,636
2
48
Del Rio, TX
Sep 7, 2007
#2
  • Sep 7, 2007
  • #2
jhonda,
I am wondering about the coil hookup. Are you sure you are hooked into the NEGATIVE side of the coil? If on the positive side I would guess you are grounding out the starter..or worse.
Worth a double check because your hookup shouldn't cause the car not to start.
Ken
 

jhonda

Member
Jul 22, 2003
125
1
16
Huntersville NC
Sep 9, 2007
#3
  • Sep 9, 2007
  • #3
The car will crank over fine it just want start
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,372
18,120
224
Massachusetts
Sep 9, 2007
#4
  • Sep 9, 2007
  • #4
You connected it oto the NEG side of the coil right?? Not the pos side??

This is the wire you are taking off and it will start??
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Sep 9, 2007
#5
  • Sep 9, 2007
  • #5
Also, how did you make the connection?

With the tach hooked up like it should be (when it won't start), if you put a test light biased across the two electrical wires going to the coil, does the test light flash real quick while cranking?
 
You must log in or register to reply here.

Similar threads

T
Electrical Brown Connector #31
  • ta66
  • Jul 26, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
220
Fox 5.0 Mustang Tech Jul 30, 2026
ta66
T
J
Fox Lost all gauge cluster function after Holley Terminator X install (solved)
  • Justin17383
  • Nov 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
266
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Friday at 3:09 PM
2000xp8
Electrical Code 29 again
  • Creomod
  • Jul 31, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
393
Fox 5.0 Mustang Tech Aug 3, 2026
Creomod
Electrical 91 hatch wiring help needed
  • FastDriver
  • Apr 7, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
275
Fox 5.0 Mustang Tech Apr 8, 2026
FastDriver
C
Electrical HELP! 1989 5.0 Stick, Voltage Bleed onto Ignition Trigger wire
  • ChickenDeluxe
  • May 14, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
405
Fox 5.0 Mustang Tech May 24, 2026
ChickenDeluxe
C
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?