My tach doesn't work also

jhonda

Member
Jul 22, 2003
125
1
16
Huntersville NC
I bought a sunpro 2" tach. I hooked the green wire to the coil, red wire to the pos. side of the batterie and the black wire to the neg side. When ever I do this my car will not start, after I take it off it will fire right up.....any ideas?
 
jhonda,
I am wondering about the coil hookup. Are you sure you are hooked into the NEGATIVE side of the coil? If on the positive side I would guess you are grounding out the starter..or worse.
Worth a double check because your hookup shouldn't cause the car not to start.
Ken
 
Also, how did you make the connection?

With the tach hooked up like it should be (when it won't start), if you put a test light biased across the two electrical wires going to the coil, does the test light flash real quick while cranking?