Takin my NPI motor out and putting in a 99 Windsor PI motor with crower stage 2 cams, comp cams valve springs, BBK longtube headers, stage 8 locking header bolts.
Also installing offset steering rack bushings. I'm excited =D Gonna go work on it as soon as my dad gets back. I already pulled the H pipe off, drained the transmission, disconnect a few misc wires and connectors from under the hood. Pulled the battery out, found that my battery tray was loose so tightened that. lol Found my 30 dollar craftsman 8mm ratchet wrench that i ALREADY replaced
Heres a pic of the motor! We're going to be dropping the K member, just because it sounds easier than fussin with it all.
Also installing offset steering rack bushings. I'm excited =D Gonna go work on it as soon as my dad gets back. I already pulled the H pipe off, drained the transmission, disconnect a few misc wires and connectors from under the hood. Pulled the battery out, found that my battery tray was loose so tightened that. lol Found my 30 dollar craftsman 8mm ratchet wrench that i ALREADY replaced
Heres a pic of the motor! We're going to be dropping the K member, just because it sounds easier than fussin with it all.