I am going to replace my clutch. The stocker has about 80k on it, but it is not the clutch that is bad. My freakin TB has been making noise for 40k miles, and now the noise is turing from a squeak to a squeaky grind. So while I was searching, I found this.
Zoom D2 Twin-Disk Clutch
It is a Zoom clutch. Now before you say instantly that "they suck", I found an interesting fact. They are made by precision clutch, one of the most recognized names in clutches. Now that that is out of the way, here are my questions. First off, this is an 8.75 inch clutch with the flywheel. This will greatly reduce the rotational inerta, but also reduce the parasidic loss in the drivetrain (smaller = more hp to the road). I dont see this as being a lot, but what do you think about it? The clutch I linked is the stage 3 and is reported to hold 800 ft/lbs of torque.
Please feel free to discuss this.
Zoom D2 Twin-Disk Clutch
It is a Zoom clutch. Now before you say instantly that "they suck", I found an interesting fact. They are made by precision clutch, one of the most recognized names in clutches. Now that that is out of the way, here are my questions. First off, this is an 8.75 inch clutch with the flywheel. This will greatly reduce the rotational inerta, but also reduce the parasidic loss in the drivetrain (smaller = more hp to the road). I dont see this as being a lot, but what do you think about it? The clutch I linked is the stage 3 and is reported to hold 800 ft/lbs of torque.
Please feel free to discuss this.