Need 3/8 npt for vortech oil drain line

[a97mustang]

ok,i have everything else done besides the oil pan,for some reason i am having some poor luck in finding this Tap,not sure why?Yes i have been to SEARS,ACO,ACE,and still no luck.If it helps im from Michigan(Lincoln Park)direct me please,or is there another way,Sorry for the stupid question.THANKS FOR THE HELP,ADAM

 

[DropTopPony]

I just gave one of these away yesterday. You need the same tap for the intake on a PI intake swap. I bought it from McMaster-Carr part # was 2525A114 but check to make sure it is the same. But whatever you need they will have it. www.mcmaster.com

 

[a97mustang]

Thank You !!!!!

 

[SilverGTV8]

Good Ole McMaster. I order stuff from there all the time for work.

 

[BennyBlown2v]

I just got done using mine if you want it! [email protected]

 

[a97mustang]

Thats why, I love this place

 

[DropTopPony]

werd

 

[sgarlic]

So.. punching the hole in to the oil pan prevents metal pieces from reaching the oil, then you tap it and push all the pieces in to the oil anyway? Never understood that.. maybe somebody can fill me in.

 

[DropTopPony]

So.. punching the hole in to the oil pan prevents metal pieces from reaching the oil, then you tap it and push all the pieces in to the oil anyway? Never understood that.. maybe somebody can fill me in.

some people put thick grease on the tap but if your down there and drained the oil anyway...just take it off and do it. Thats what i'd do. Well actually i;d buy a Canton pan with baffles and a plug already welded in.