Need A Quick Answer On Differences With Ball Joints And Control Arms After Doing 5 Lug Swap

92Apocalypso · Jul 18, 2017

gentleman,

I'm working on the LX right now. as previously mentioned in another thread, I snapped a ball joint. i ordered moog 92 mustang lower control arms with ball joints already in them..... car has a 5 lug conversion. up front has 99-04 calipers, and I believe I have 94-95 spindles. I'm curious if I ordered the correct lower control arm if I'm using 94-95 spindles. moog part number rk622130. thanks.

Grn92LX · Jul 18, 2017

If you are using fox ball joints then you need a spacer. Otherwise, just press in sn95 joints. I rebuilt my stock arms with moog sn ball joints and polyurethane bushings when I did my 5 lug.

92Apocalypso · Jul 18, 2017

Grn92LX said:
If you are using fox ball joints then you need a spacer. Otherwise, just press in sn95 joints. I rebuilt my stock arms with moog sn ball joints and polyurethane bushings when I did my 5 lug.

do you have any other information on the spacer?? I ordered the lower control arms with ball joints because I didn't have access to a press, or I would have just ordered ball joints. thanks for any Information

Mustang5L5 · Jul 18, 2017

You want fox a arms due to the width.

Th spacer isn't anything special. 5/8" washers stacked about 0.330" thick

Get nice heavy duty hardened washers

Mustang5L5 · Jul 18, 2017

All you are doing is this.

92Apocalypso · Jul 18, 2017

Mustang5L5 said:
All you are doing is this.

super helpful man. thanks. i would prefer to get a single piece like that photo, but that's unlikely I'll find that. will have to get a bunch and stack them like suggested.... previous owner didn't do that m, and that's why the damn castle but blew through the ball joint threads.... the driver side castle but wasn't even hand tight. only a matter of time

Mustang5L5 · Jul 18, 2017

How quickly do you want to get this done?

I could send you a pair, but issue is I don't have a good padded envelope to ship in and have a busy Wed-Thur coming up.

I don't want to keep you down for potentially 1-2 weeks though

old_blue · Jul 18, 2017

These are the spacers I have ^^^. Used them in my previous car too. Already have a pair to go on my current car for these.

92Apocalypso · Jul 18, 2017

Mustang5L5 said:
How quickly do you want to get this done?

I could send you a pair, but issue is I don't have a good padded envelope to ship in and have a busy Wed-Thur coming up.

I don't want to keep you down for potentially 1-2 weeks though

you're the man, I appreciate that offer. however, i hope to not have it down that long. I'm at my buddies mercy. car is at his shop. if I can't locate anything like it, I may use washers temporarily, and maybe I'll buy a pair off of you and put them on thr car next time i am working around there.

92Apocalypso · Jul 18, 2017

Mustang5L5 said:
How quickly do you want to get this done?

I could send you a pair, but issue is I don't have a good padded envelope to ship in and have a busy Wed-Thur coming up.

I don't want to keep you down for potentially 1-2 weeks though

I forgot to mention, that we had to cut one of the A arm bolts, so I have to find one of those also.... I'm hoping I can find a place around here that has both

Mustang5L5 · Jul 19, 2017

Ok well let me know if you want a pair

Need A Quick Answer On Differences With Ball Joints And Control Arms After Doing 5 Lug Swap

92Apocalypso

Well-Known Member

Grn92LX

Fidanza Man!

92Apocalypso

Well-Known Member

Mustang5L5

That is…until I whipped out my Bissell

Mustang5L5

That is…until I whipped out my Bissell

92Apocalypso

Well-Known Member

Mustang5L5

That is…until I whipped out my Bissell

old_blue

92Apocalypso

Well-Known Member

92Apocalypso

Well-Known Member

Mustang5L5

That is…until I whipped out my Bissell

Similar threads

Need A Quick Answer On Differences With Ball Joints And Control Arms After Doing 5 Lug Swap

Well-Known Member

Fidanza Man!

Well-Known Member

That is…until I whipped out my Bissell

That is…until I whipped out my Bissell

Well-Known Member

That is…until I whipped out my Bissell

Well-Known Member

Well-Known Member

That is…until I whipped out my Bissell

Similar threads

Privacy & Transparency

Privacy & Transparency