• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Drivetrain Need A Stock Yoke For 88ish 5.0 T5. Is M-4841-b Correct?

  • Thread starter Thread starter JohnnyK81
  • Start date Start date Sep 6, 2013

JohnnyK81

Member
Sep 17, 2007
83
0
7
Sep 6, 2013
#1
  • Sep 6, 2013
  • #1
Have a bit of a leak out the back of the T5 in my 87-89 (Not sure of exact year, I just used the drivetrain) 5 spd. The yoke seems a little rusty where it rides in the seal.

Is a FRPP M-4841-B the stock replacement? Or is there something different about that one (u-joints, etc?).

What else is a stock replacement?

Thanks!
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,321
18,048
224
Massachusetts
Sep 6, 2013
#2
  • Sep 6, 2013
  • #2
Change the bushing inside as well as the seal. It might be VERY tricky to get the bushing out with the tailhousing on the T-5. The mainshaft tends to be in the way.

That shaft looks like it will work on a t-5 fine. The AOD's use a counterweight on their yokes, but that's not an issue here. That's the only difference I know
 

Gearbanger 101

Straight Outta Locash
20+ Year Stangneter
Aug 10, 2002
9,457
1,377
234
Ontario, Canada
Sep 6, 2013
#3
  • Sep 6, 2013
  • #3
Yeah, that looks right. Another suggestion....not a yoke on it's own, but this might be a good excuse to upgrade to a FRPP aluminum shaft. Great way to reduce driveline vibration, remove some drivetrain weight and in comes with that same 28-spline Yoke.
 

JohnnyK81

Member
Sep 17, 2007
83
0
7
Sep 6, 2013
#4
  • Sep 6, 2013
  • #4
Thanks guys. THis is on a 67, so driveshaft would have to be custom made. Not doing that just yet.

But that looks like a stock replacement? Uses the same U-joints as a fox? (I think I took the yoke and driveshaft from a fox, chucked the driveshaft, and had some u-joints that mated with another driveshaft.. so yoke is from a Fox on mine, so I need an identical replacement).
Thanks!
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,321
18,048
224
Massachusetts
Sep 7, 2013
#5
  • Sep 7, 2013
  • #5
Looks like a stock fox replacement to me
 
You must log in or register to reply here.

Similar threads

Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
344
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
For Sale Borg Warner WC T5, Stock Bell Housing, RAM Clutch Set, Double Hump Cross Member, & Pro 5.0 Shifter
  • AeroCoupe
  • Aug 9, 2025
  • Drivetrain Parts
Replies
3
Views
827
Drivetrain Parts Sep 7, 2026
AeroCoupe
6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
4
Views
1K
1965 - 1973 Classic Mustangs -General/Talk- Jun 20, 2026
gray owl
G
Drivetrain T5 Yoke dimensions
  • FastDriver
  • Sep 17, 2022
  • Fox 5.0 Mustang Tech
Replies
0
Views
4K
Fox 5.0 Mustang Tech Sep 17, 2022
FastDriver
For Sale 3-owner 1987 Mustang GT, $18K obro, Lancaster CA
  • Bill Cool
  • Oct 6, 2024
  • Fox Body Mustangs For Sale (1979-93)
Replies
4
Views
2K
Fox Body Mustangs For Sale (1979-93) Oct 13, 2024
nickyb
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?