• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

need a walk thru for replacing rear driverside studs.

  • Thread starter Thread starter trav_19
  • Start date Start date Dec 29, 2006

trav_19

New Member
Oct 29, 2006
810
0
0
Jackson, MI
Dec 29, 2006
#1
  • Dec 29, 2006
  • #1
well i started to tear it down took the 13 mm bolts out for the caliper
started to take the 15mm bolts(i think) for the caliper bracket out.
and i stopped what do i do with the e-brake cable? and where do i go from here?
is the abs ring in the way...looked like more then i wanted to tackle...
can someone walk me thru the whole process?? thanks a lot guys.
 

The Green GT

No 13 year olds are safe around me.
10 Year Member
Jan 8, 2006
1,269
19
99
Louisiana
Dec 29, 2006
#2
  • Dec 29, 2006
  • #2
Remove caliper, pull off rotor, tap stud out and put new one in. You dont have to mess with anything else.
 

94GTMOOSE

Member
Jun 27, 2005
303
0
16
jersey shore
Dec 29, 2006
#3
  • Dec 29, 2006
  • #3
vague but informative, i give it a 8.5. Green gt
 

trav_19

New Member
Oct 29, 2006
810
0
0
Jackson, MI
Dec 29, 2006
#4
  • Dec 29, 2006
  • #4
so i can leave the caliper bracket on and the abs rings not in the way?.. i feel stupid now lol thanks guys!!!
 

The Green GT

No 13 year olds are safe around me.
10 Year Member
Jan 8, 2006
1,269
19
99
Louisiana
Dec 29, 2006
#5
  • Dec 29, 2006
  • #5
94GTMOOSE said:
vague but informative, i give it a 8.5. Green gt
Click to expand...

I get down to business son.
 

trav_19

New Member
Oct 29, 2006
810
0
0
Jackson, MI
Dec 30, 2006
#6
  • Dec 30, 2006
  • #6
well i got it all torn down and started ti put the studs in and i dont have my compresser hooked up yet so this sucks!!!!! anyways i was curious about the quadshock?? where it attaches to the axel the rubber is destroyed but the shock looks good still is there a replacement rubber gromet or do i need to replace the whole shock?? should i worry about it at all?
 

The Green GT

No 13 year olds are safe around me.
10 Year Member
Jan 8, 2006
1,269
19
99
Louisiana
Dec 30, 2006
#7
  • Dec 30, 2006
  • #7
I wouldnt worry about it unless you have wheel hop.
 
You must log in or register to reply here.

Similar threads

W
Front ATS brakes with Taurus rear brakes. Full parts needed?
  • Wagonized
  • Sep 24, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
293
Fox 5.0 Mustang Tech Sep 25, 2026
General karthief
N
Vibration after new clutch
  • nipple_looker
  • Sep 20, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
715
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 26, 2026
fasterthangas
F
P
Is it normal for all of this to go wrong or did I get played when I bought this ONLY A MONTH AGO.
  • ponygal02
  • Nov 14, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
372
1996 - 2004 SN95 Mustang -General/Talk- Nov 14, 2025
Noobz347
Cobra Brake Conversion - Spare Wheel/Tire Search
  • AeroCoupe
  • Aug 2, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
510
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 2, 2026
AeroCoupe
9
Brakes Rear brakes feel stuck after replacing pads and rotors
  • 99stanggtvinx
  • Aug 31, 2024
  • SN95 4.6L Mustang Tech
Replies
1
Views
620
SN95 4.6L Mustang Tech Sep 1, 2024
nickyb
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?