Need advice while tranny is out

[darthcual]

Well i got my subframe connectors mounted and took out my stock muff/tailpipes for the dynomax dumps. questions are 1) where can i get a pair of 2 1/2" flow tubes on the cheap and 2) what else should i replace besides the clutch and flywheel while i've got the tranny out? Thanks for the Help.

 

[ram360]

Replace the pilot bearing and rear main seal while the trans is out. As for the flow tubes try summit racing. I think there like $30.

 

[tunedin302]

Replace the pilot bearing and rear main seal while the trans is out.

I agree you should replace the pilot bearing. I would also add the throw out bearing to that list. Get the flywheel resurfaced and I assume you're replacing the pressure plate and clutch disc. As for the RMS, if it isn't leaking then don't touch it.

 

[50gt1988]

If your running a T5 if might be a good idea to replace the aluminum Throw Out Bearing Retainer for a steel one.