• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-

Need brighter lights?

  • Thread starter Thread starter ArkansasMystic
  • Start date Start date Aug 24, 2008
A

ArkansasMystic

New Member
Feb 16, 2007
43
0
0
Aug 24, 2008
#1
  • Aug 24, 2008
  • #1
I am in need of some better lighting for my 96 Cobra. I have BOI Smoked headlights, not looking to do a retrofit, and I DO NOT want HID's, not worth it IMO. So, that leaves me with halogens. How much better would Sylvania Silverstars be compared to stock lights? I will be swapping out the fog lights as well. Is there any other ones to consider? Before I spend $80 on the Sylvania bulbs I want to make sure it is worth it. Thanks.
 

V_Eight

Founding Member
Sep 5, 2002
617
1
0
ATL
Aug 24, 2008
#2
  • Aug 24, 2008
  • #2
Silverstars vs stock is negligible. HID projector conversion would be the best output possible. Drop in hid's are ghetto and half-assed.
 

waggs

New Member
Jul 3, 2008
24
0
1
arizona
Aug 24, 2008
#3
  • Aug 24, 2008
  • #3
LittleJohn07 said:
I am in need of some better lighting for my 96 Cobra. I have BOI Smoked headlights, not looking to do a retrofit, and I DO NOT want HID's, not worth it IMO. So, that leaves me with halogens. How much better would Sylvania Silverstars be compared to stock lights? I will be swapping out the fog lights as well. Is there any other ones to consider? Before I spend $80 on the Sylvania bulbs I want to make sure it is worth it. Thanks.
Click to expand...
what's a retrofit?
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,371
18,119
224
Massachusetts
Aug 24, 2008
#4
  • Aug 24, 2008
  • #4
waggs said:
what's a retrofit?
Click to expand...


It's when you take a stock halogen housing, and retrofit true HID projectors inside the housing so the HID light is properly projected.




It's considered the "proper" way to put HID's on a car not originally equipped with them as OEM equipment and not create glare. Installing a plug-and-play kit in the stock housing is MUCH cheaper, but considered the "hack" way of achieving it.

The thing is, nobody wants to pay the $$$ to do it right. HID projectors can cost $100-200 and then you need to custom fabricate them into your OEM housings. Then you gotta buy the HID kit and OEM bulbs and wire it all up.

The end result is usually an OEM-quality cut-off line that looks better and doesn't blind everyone. It also looks better on the car as it looks classier with a sharp line like this. Notice thee are no hot spots, the light is even all the way across and nothing above the cutoff line at all.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,371
18,119
224
Massachusetts
Aug 24, 2008
#5
  • Aug 24, 2008
  • #5
LittleJohn07 said:
IBefore I spend $80 on the Sylvania bulbs I want to make sure it is worth it. Thanks.
Click to expand...


Check Ebay. I got my silverstars for $25 plus shipping for the two headlight bulbs and foglamp bulbs. I found the foglamp bulbs burned out and didn't match, so i ended up buying two ricer fog light bulbs that were actually white and matched the silverstar headlights better than the silverstar foglights did.

You could run a relay setup and draw power directly off the battery and use the OEM headlight harness to activate the relays. The lights would burn slightly brighter due to more direct current feed vs traveling through the OEM headlight harness.

Could run smoked clear fog lamps as well
 

2000fordstanggt

Member
Sep 6, 2005
404
1
16
Westland, MI
Aug 24, 2008
#6
  • Aug 24, 2008
  • #6
.......
 

2000fordstanggt

Member
Sep 6, 2005
404
1
16
Westland, MI
Aug 24, 2008
#7
  • Aug 24, 2008
  • #7
Silverstars are not worth the money
 
I

ItsStock02

Member
Aug 18, 2008
492
4
19
Westland, MI
Aug 24, 2008
#8
  • Aug 24, 2008
  • #8
Silverstars will not be any brighter than a stock halogen, only whiter.

I had Silverstars in the lows and fog lights in my Saturn and the fogs would always burn out. Im sure its because of the crappy housing, but it was annoying to say the least. And at $20 a pop it was no worth it at all.

You can get a HID kit off ebay for $60 btw..
 

ScortLX

Founding Member
Mar 20, 2001
261
0
16
Parker, Colorado
Aug 24, 2008
#9
  • Aug 24, 2008
  • #9
Mustang5L5 said:
It's when you take a stock halogen housing, and retrofit true HID projectors inside the housing so the HID light is properly projected.




It's considered the "proper" way to put HID's on a car not originally equipped with them as OEM equipment and not create glare. Installing a plug-and-play kit in the stock housing is MUCH cheaper, but considered the "hack" way of achieving it.

The thing is, nobody wants to pay the $$$ to do it right. HID projectors can cost $100-200 and then you need to custom fabricate them into your OEM housings. Then you gotta buy the HID kit and OEM bulbs and wire it all up.

The end result is usually an OEM-quality cut-off line that looks better and doesn't blind everyone. It also looks better on the car as it looks classier with a sharp line like this. Notice thee are no hot spots, the light is even all the way across and nothing above the cutoff line at all.
Click to expand...


WOW. Those look amazing. Who's car is that? It would be worth the money to do it right if they came out like that!
 
A

ArkansasMystic

New Member
Feb 16, 2007
43
0
0
Aug 24, 2008
#10
  • Aug 24, 2008
  • #10
I don't want the headache's with the plug and play kit. I would rather have my current setup vs. a half way done one. I don't have the knowledge or skills to do a retrofit, otherwise I would. Guess I will be sticking with stockers. I can live with it, but was hoping for $100 or less I could get brighter lighting. I love the true HID's, but HID's in halogen housings isn't something I am gonna do. I know the price of them, I just don't want the plug and play. Thanks, any more input is appreciated.
 

V_Eight

Founding Member
Sep 5, 2002
617
1
0
ATL
Aug 24, 2008
#11
  • Aug 24, 2008
  • #11
ScortLX said:
WOW. Those look amazing. Who's car is that? It would be worth the money to do it right if they came out like that!
Click to expand...

I'll one up that fox.



Something i'll be attacking soon. Will run about $600 total.

 
A

ArkansasMystic

New Member
Feb 16, 2007
43
0
0
Aug 24, 2008
#12
  • Aug 24, 2008
  • #12
I may not do the silverstars, atleast completely. It seems my fogs provide 75% of my lighting (or atleast make it a TON better driving). I'm contemplating an Envoy fog light swap. They fill the holes better, and also tend to be brighter, so I've been told. Also, I am considering running HID fogs with Silverstars in the headlights so they somewhat match. Benefits: brighter lighting, yet low enough not to blind oncoming traffic. I know I will do the Envoy mod, but any opinions on the HID fogs, will it help, will it blind people, etc? Thanks.
 
S

southfillyboy

Member
Aug 13, 2008
38
0
6
Aug 24, 2008
#13
  • Aug 24, 2008
  • #13
I got luminics in my headlights and fog lights and I definitely saw an improvement.
 
You must log in or register to reply here.

Similar threads

M
Electrical lights
  • Magnet86
  • Sep 11, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
305
Fox 5.0 Mustang Tech Sep 14, 2026
Magnet86
M
6
2010 V6 Sees differently than GT?
  • 6t9Mach1
  • Mar 31, 2026
  • 2010 - 2014 Specific Tech
Replies
2
Views
315
2010 - 2014 Specific Tech Apr 1, 2026
6t9Mach1
6
F
Ford 460 swap
  • Ford460
  • Sep 13, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
6
Views
488
1996 - 2004 SN95 Mustang -General/Talk- Sep 14, 2026
Ford460
F
C
LED vs HID 93 Mustang
  • Crigano
  • Jan 17, 2023
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3
Replies
42
Views
9K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 23, 2023
Crigano
C
C
LED vs HID headlights
  • Crigano
  • Jan 10, 2023
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
0
Views
917
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 10, 2023
Crigano
C
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?