I am currently swapping a 89 5.0 into an 84 cj7 and would like to know what are all the sensors i need to make this thing run properly. I am getting rid of the smog stuff, as well as teh A/C. So basicaly i need just the essential sensors. Thanks.
Need EFI Help
- Thread starter blue66tang
- Start date
347Fastback
Member
This is the site I am using for my EFI install in my 66 Fastback. Good Luck!
http://fordfuelinjection.com/
http://fordfuelinjection.com/
347Fastback
Member
I have been lookign at that site as well, but it deosnt seem to have a very good step by step of what a install needs.
Great about the docs. My email is [email protected]
Great about the docs. My email is [email protected]
Dagz
New Member
That would be great I need all the help as I can get as iI am also just planning the swap for this winter. Please email the links to [email protected]
Thanks Dagz
Thanks Dagz
Dagz
New Member
That would be great I need all the help I can get since I am also going to make the EFI swap this winter. Thanks for the help my email is [email protected].
Hope this doesn't post twice
Dagz
Hope this doesn't post twice
Dagz
red65
Member
This manual is about the best step-by-step resource that I've found.
http://www.vintagebronco.com/newberry/pages/tech/efi/efi.html
I used it when I installed the EFI in my '65. The wire and connector colors in the manual are a perfect match for a '92 5.0 wiring harness. You might have to do a little interpretation for an '89 harness, but it'll get you close. Good luck.
http://www.vintagebronco.com/newberry/pages/tech/efi/efi.html
I used it when I installed the EFI in my '65. The wire and connector colors in the manual are a perfect match for a '92 5.0 wiring harness. You might have to do a little interpretation for an '89 harness, but it'll get you close. Good luck.
Thanks, I just got this from somebody as well. I already read it over and this job seems pretty dang simple. The only thing I need is to find a barometric sensor. Anybody know where I can get one. New onse are freaking expensive. Thanks gusys
red65 said:
blue66tang said:
Junkyard or here: http://cgi.ebay.com/ebaymotors/86-8...013QQitemZ230035475140QQrdZ1QQsspagenameZWDVW
yes.
i wouldn't call the swap easy by any means. be prepared to do a lot of work to get the power circuits done correctly (if you're doing it according to the fordfuelinjection.com recommendation of 4 relays).
i wouldn't call the swap easy by any means. be prepared to do a lot of work to get the power circuits done correctly (if you're doing it according to the fordfuelinjection.com recommendation of 4 relays).
Similar threads
