Need flowsheet for Pro-M 80mm PLEASE!

[mustanggt94]

I have an 80mm Pro-M (plastic) meter that is cal'ed for a 94 Cobra with 24# injectors and I am in desperate need for the flowsheet for it. I bought it used with no flowsheet and I cannot find one anywhere. Since Pro-M is outta business and their new company doesn't have any old data anymore then my only way to get a new one is to send this one out and have them test it for $100+! Any help would be appreciated! Thanks in advance!

 

[BlackFox5.0]

If you can't find one, your best bet would be to load up the "PROM24" calibration in CalEdit and adjust it to your needs.

Also every flowsheet is specific to each meter, so Don't expect it to be be perfect the first time you load it.

 

[mustanggt94]

Yeah I plan on doing that, but I was hoping to get one for the 80mm because it would at least be closer, even though every flowsheet is different...I just don't want to send my meter out yet especially since their new company isn't very orgainzed yet. Do you know if the one in CalEdit is for 75mm or what? I assume so since 75mm is the most popular size MAF. Thanks.

 

[BlackFox5.0]

Your assumption is probably correct. Don't send it back, it's not worth it. I just bought a blow-thru meter from the new company and it took over one month for me to recieve it they need to get going over there, I don't care how new they are. At least my meter works perfectly. My car runs like stock again, only with a little more HP .