Need Harmonic Balancer Help and Part#

[arbailey]

I'm looking into replacing my stock 140K mile harmonic balancer and popular opinion seems to be split between the Powerbond/Pioneer unit and the Romac. I was able to find part #'s for the Powerbond/Pioneer units - 872030 (SFI) and DA3021 (non-SFI), but does anyone know the part number for the Romac unit? And does Romac only make SFI balancers? My motor is basically stock for now but I plan on adding an A-trim (to start) in the future and I only want to do this once. Even with the blower I don't see the motor turning past 6000 rpms. Will I need an SFI balancer if I get blown? Is it my imagination or are the majority of the balancer posts from guys with 94-95 cars? Why would they go through balancers more than the 87-93 cars?

 

[bln92cpe]

ROMAC if youwanna do it right..look up their site..I have one and its the best

 

[wytstang]

Is it my imagination or are the majority of the balancer posts from guys with 94-95 cars? Why would they go through balancers more than the 87-93 cars?

Our sn95 cars are known for bad balancers don't know why tho. I bought the Professional Products non-sfi part#80007 50oz it cost $108 shipped from www.c-f-m.com you also need the damper spacer to run this dampner ($108 was the total for both). This damper is good for up to 6500rpms but if you have the money the Romac is the best.

 

[arbailey]

ROMAC if youwanna do it right..look up their site..I have one and its the best

I've been doing searches and trying links, none seem to work. Would you happen to know their web address?