• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SVT Tech Forum

NEED HELP, F-body invasion!!!

  • Thread starter Thread starter BoostedCobra
  • Start date Start date Sep 12, 2004
B

BoostedCobra

New Member
Sep 11, 2004
6
0
0
Granger, IN.
Sep 12, 2004
#1
  • Sep 12, 2004
  • #1
My area is overran with f-bodies and DSMs and I am trying to shut their Mustang hating A**, but they run 11s and i don't. I have a '98 Mustang Cobra with a procharger s/c, currently pushing out 443 horses and 393 ft/lbs. torque trying to break into the 11s. Ultimate goal is to reach low to mid 11s. I got more information under timeslips for BoostedCobra. I ran 12.7 at 112mph. I have a procharger p-1sc, pushing out 10lbs. of boost, about 7 since I put new BBK 65mm throttlebody and port-matcheded the intake, and put on new bassani x-pipe and catback. I have a steeda tri-ax shifter, 42lbs. injectors, 80mm maf 2 fuel pumps (193 in tank & 240 external), custom tuned. I have a CO2 intercooler purge kit which I didn't use this time, but last time I used it, it didn't make any difference, so i stopped using it. I run 245 Nitto Drag Radials on stock 17" rims, everything else is stock, even the 3.27 rearend gears. Any help, comments, advice would be appreciated. Thanks.
 
C

CaliSS2001

New Member
Jul 11, 2004
23
0
0
Stockton, Ca
Sep 12, 2004
#2
  • Sep 12, 2004
  • #2
Dude 443 RWHP is good for 11's, and I'd say with ET streets 3.73's and a 1.8 or better 60' your there you have the trap for it. You should murder a lot of cars, With my SS I pulled a 12.66 with a 2.0 60' and you have a higher trap than I pull also I'm at 111 N/A and 121 with a 150 shot (11.64). BTW bad ass car my Cobra runs a 13.69@101 with a 2.2 60' low 13/high 12's comming with a 1.7 60'.
 

missouri_guy197

New Member
Aug 31, 2002
1,441
1
0
St. Louis, MO
Sep 12, 2004
#3
  • Sep 12, 2004
  • #3
Get some ET Streets on 15" wheels on that thing and learn how to drive it...

My car runs 12.8's as it sits with 300hp...
 
You must log in or register to reply here.

Similar threads

Need Help, Car Wont Start, I've Gone Through Both Checklists
  • 93silverlx50
  • Jul 22, 2017
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
54
Views
12K
Fox 5.0 Mustang Tech Apr 30, 2019
General karthief
I Need Help... Fox Body Jerks And Stutters
  • Mccarbre
  • Apr 9, 2016
  • Fox 5.0 Mustang Tech
  • 2
Replies
26
Views
14K
Fox 5.0 Mustang Tech Apr 20, 2016
Mccarbre
Hood prep, primer, sanding help needed.
  • DNA DOA
  • May 7, 2010
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
8K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 16, 2010
DNA DOA
M
Help! HUGE disappointment at dyno 324 Hp and 372 FT LBS. torque
  • MYSC351
  • Jun 1, 2008
  • Fox 5.0 Mustang Tech
  • 2
Replies
37
Views
6K
Fox 5.0 Mustang Tech Jun 11, 2008
cptkng79
C
P
Please! Need Help With My 306 setup 500+ H.P
  • PewterLS1
  • Feb 7, 2006
  • Fox 5.0 Mustang Tech
Replies
19
Views
6K
Fox 5.0 Mustang Tech Feb 14, 2006
PewterLS1
P
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SVT Tech Forum
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?