Need help figuring out this persistant cluch issue

[squares98]

When the car is off and I push in the clutch it's travel is smooth, yet there is a squeak that occurs.
When the car is turned on the clutch pedel travel becomes very rough and notchy. When you push the cluch in by hand while the car is on you can feel the action is notchy.

My tob squeaks a little when I push in the clutch. I also adjusted the firewall adjuster to get rid of the TOB "tick", when the clutch is engaged.

The cluch, flywheel, tob (infact everything in the housing) is less than 8 months old, and only started this in the past 2 months.

 

[mity2]

.. Only thing in that area that changes its state depending on car running or not thats attatched to clutch cable is TOB(spinnin while car is running, and not while engine is off. So i would start from TOB. TOB could be prematurely dying...

 

[squares98]

.. Only thing in that area that changes its state depending on car running or not thats attatched to clutch cable is TOB(spinnin while car is running, and not while engine is off. So i would start from TOB. TOB could be prematurely dying...

The tob is what I was afraid of, damm.:Teh-Win: