Need Help Finding Wiring Harness

Beercoaster

New Member

Nov 8, 2011

2

0

1

Odenville, Alabama

Jan 26, 2012

#1

• Jan 26, 2012

• #1

I've got an 89 LX. It runs great but the OEM harness is spliced, chewed, and rigged. There are wires dangling everywhere and even speaker wire is used under the hood. I want to replace every wire in the car but can't anybody who makes a bumper to bumper harness. Does anybody have any suggestions?

 

VibrantRedGT

"STANGNET'S PENGUIN SMACKER"

15 Year Member

Nov 29, 1999

14,679

424

154

Boca Raton, Florida

Jan 26, 2012

#2

• Jan 26, 2012

• #2

Check the aftermarket by Painless Performance, Ford OEM, etc.

Just a quick check on eBay.
http://motors.shop.ebay.com/i.html?_from=R40&_trksid=m570.l2736&_nkw=FORD+MUSTANG+WIRING+HARNESS

 

ID89GT

10 Year Member

May 26, 2008

1,659

18

49

Spokane Valley, WA

Jan 26, 2012

#3

• Jan 26, 2012

• #3

I picked up a complete body harness for 250. From headlight to tail light. Then i got an 89 maf computer harness, injector harness and 02 sensor harness for another 75. Just look online

 

wht93gtEd

Active Member

Nov 11, 2004

0

9

29

Jersey Shore, New Jersey

Jan 26, 2012

#4

• Jan 26, 2012

• #4

There's a junk-yard about 35 minutes from me who has tons of them. C&H Mustang in Jackson, NJ. Look it up and give them a call.

 

Beercoaster

New Member

Nov 8, 2011

2

0

1

Odenville, Alabama

Jan 26, 2012

#5

• Jan 26, 2012

• #5

Thanks for the quick replies. I have looked at Painless but I guess my 89 isn't old enough. No luck with Ford either. I guess I'll have to settle for a used harness off ebay or out of a salvage yard. Thanks again.

 

stangboy

Founding Member

Aug 31, 1999

3,932

469

194

New Orleans, LA

Feb 3, 2012

#6

• Feb 3, 2012

• #6

Well, I don't know about a new bumper-to-bumper harness but I found the under-the-hood harness for EFI MAF setup. I'm actually thinking about getting this harness to do my MAF conversion. Here's the link: http://www.jegs.com/i/Painless-Performance-Products/764/60510/10002/-1?parentProductId=

 

ID89GT

10 Year Member

May 26, 2008

1,659

18

49

Spokane Valley, WA

Feb 3, 2012

#7

• Feb 3, 2012

• #7

Thats a rip off. You should be able to find one for a quarter of that price easy

 

stangboy

Founding Member

Aug 31, 1999

3,932

469

194

New Orleans, LA

Feb 3, 2012

#8

• Feb 3, 2012

• #8

Please, do tell...where???? Because $525 would take pretty big bite out of my budget.

 

srtthis

the guy doing it does every local racers rear end

15 Year Member

Jul 3, 2009

5,129

1,666

204

Maryland

Feb 3, 2012

#9

• Feb 3, 2012

• #9

im sure bill@CJponyparts has one in the salvage yard behind the shop.

 

txstang84

15 Year Member

May 21, 2005

1,639

42

69

Tuscola, tx

Feb 3, 2012

#10

• Feb 3, 2012

• #10

You could check MPS or like Nick said, just start looking online...

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,170

17,870

224

Massachusetts

Feb 4, 2012

#11

• Feb 4, 2012

• #11

stangboy

iST makes Mass-air swap harness for about $45. You don't need a $500 harness. All you are adding is 7 wires and repinning the computer slightly. I've installed about 3 of these kits with no issues

http://www.mass-air.com/Products.htm




@ the original poster. If you do get a new harness, be aware you need to be year/trans specific. So for 1989 you can use any 87-89 body harness but you need a t-5 transmission harness from any 86-93. For the engine, you can only use a 1989 harness, unless you find an 86-88 engine harness and use the mass air conversion harness above.

 

ID89GT

10 Year Member

May 26, 2008

1,659

18

49

Spokane Valley, WA

Feb 4, 2012

#12

• Feb 4, 2012

• #12

Online mustang classifieds is where i would look. Either here on stangnet or over at the corral.

 

lxman

Member

Nov 5, 2010

279

16

19

Avondale, AZ

Feb 4, 2012

#13

• Feb 4, 2012

• #13

I work at www.bieberfever.com and we also have a salvage yard with 79 and newer mustangs. We have tons of wiring harness in good functioning quality. Give us a call at (602) 437-1270. Ask for Bob and he can set you up with what you need. We ship everywhere.