• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Need help on launching with nitto's on a 400hp stang

  • Thread starter Thread starter 2003gt
  • Start date Start date Jul 14, 2004

2003gt

Member
Apr 27, 2003
290
0
16
Brandon, MS
Jul 14, 2004
#1
  • Jul 14, 2004
  • #1
got a 400 hp mustang, and just got my nitto 315 tires......i know how to do a good burnout, but how should i launch......street and strip.......what rpms, and how do i let out the clutch.......
 

damacman

Member
Aug 12, 2003
529
0
16
Phoenix, AZ
Jul 15, 2004
#2
  • Jul 15, 2004
  • #2
There really isn't one specific way to launch your car. You'll have to experiment with numerous RPMs to get the launch that hooks -- too many variables -- track prep, weather, length of burnout, etc. You'll probably want to also experiment with slipping the clutch versus simply dumping it although slipping the clutch with 400 hp could be a recipe for clutch failure.

I can tell you this much -- launching a 400 hp car on drag radials on the stock 28 spline sticks is a sure fire way to get a ride home on a flatbed tow truck.
 

2003gt

Member
Apr 27, 2003
290
0
16
Brandon, MS
Jul 15, 2004
#3
  • Jul 15, 2004
  • #3
well, what are you recomending ????

and thanks for the info
 

wms004

Founding Member
Jan 15, 2002
2,864
2
49
Los Angeles
Jul 15, 2004
#4
  • Jul 15, 2004
  • #4
2003gt said:
well, what are you recomending ????

and thanks for the info
Click to expand...
He is saying you need to get some 31 Spline Axles and tough differential, like Auburn.. then just be ready for a clutch if you are doing a lot of launches.. From my experience, I get the best launches N/A by not dropping the clutch at any rpm, but letting out on the clutch while simultaneously quickly pressing the gas.. Well that doesn't help much, but there is minimal slippage. Just find out how much rpm you can go before you start spinning bad.
 
S

super street

New Member
Jan 15, 2004
38
0
0
houston
Jul 15, 2004
#5
  • Jul 15, 2004
  • #5
with a stock rear end i wouldn't launch over 2500 rpm. nitto d/rs suck the first few times on launches,you definately need to burn through a few layers of the tread. also when they look almost bald is when they're the most sticky, in my experience. they hook real good at about 12 psi.
 

2003gt

Member
Apr 27, 2003
290
0
16
Brandon, MS
Jul 15, 2004
#6
  • Jul 15, 2004
  • #6
really ? 12psi ???

i have 315/35/17 on the rear......
 

Ryan02Stang

Active Member
Jun 17, 2003
1,181
0
36
Arlington Heights, Illinois
Jul 15, 2004
#7
  • Jul 15, 2004
  • #7
2003gt said:
really ? 12psi ???

i have 315/35/17 on the rear......
Click to expand...
I have the same tires. I am N/A now so I slip out the clutch at 4000 rpm. I am installing a blower though this month so I will also be near 400rwhp. I plan on building the rear end and running slicks.
 

99RioRedVert

New Member
Feb 13, 2003
95
1
0
Chesapeake, VA
Jul 15, 2004
#8
  • Jul 15, 2004
  • #8
You're far less likely to break something on DRs than slicks. They just don't hook as hard. I'm sure someone will come in here and tell you they broke on DRs. Its a crapshoot. I've probably launched 75-100 times on my DRs with no problems. I launch around 3,000-3,300 rpm and slip the clutch. I usually drop the PSI to 15. 12 would probably be better though.
 

2003gt

Member
Apr 27, 2003
290
0
16
Brandon, MS
Jul 15, 2004
#9
  • Jul 15, 2004
  • #9
ya, i don't want slicks yet, i'm to busy working on my engine....but i'm sick of doing crappy times at the track and losing to street races with my friends, because i have to much power and no traction
 
You must log in or register to reply here.

Similar threads

J
Traction Whipple stage 2
  • Jimmy koutoulas
  • Aug 2, 2025
  • 2024+ (S650) Mustang -General/Talk
Replies
8
Views
591
2024+ (S650) Mustang -General/Talk Aug 12, 2025
Noobz347
4
Drivetrain Wilwood Clutch and Brake Pedal Combo Installation - Help
  • 427stang
  • Jul 8, 2026
  • Fox 5.0 Mustang Tech
Replies
0
Views
49
Fox 5.0 Mustang Tech Jul 8, 2026
427stang
4
Considering widening my rear wheels, would like to verify my thoughts on fitment
  • 2000xp8
  • Jul 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
20
Views
414
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 15, 2026
FastDriver
P
2002 T5 transmission vibration issue
  • puffoo
  • Feb 22, 2026
  • SN95 V6 Mustang Tech
Replies
0
Views
181
SN95 V6 Mustang Tech Feb 22, 2026
puffoo
P
H
Forced Induction On3 Turbo Kit- Parts list NEEDED - 302 Stock Motor
  • Hirothecool1
  • Feb 27, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
21
Views
1K
Fox 5.0 Mustang Tech Mar 7, 2026
slow84lx
S
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?