• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

need help quick with!!!! (yes ive searched)

  • Thread starter Thread starter UnderdogGN
  • Start date Start date May 24, 2007
U

UnderdogGN

New Member
May 7, 2006
74
0
0
May 24, 2007
#1
  • May 24, 2007
  • #1
hey guys, i need help adjusting my 1.6 stud mount roller rockers...ive already searched all the threads but ive got so many different answers that im confused..i also dont want a link to a cam website because i just did the comp cams method of adjusting word for word and that did not work let me tell ya!

I know that it needs to be 1/2 to 3/4 turn on the adjusting nut after 0 lash on the push rod (slight resistance to spin) BUT,

I NEED TO KNOW WHEN TO DO THE ADJUSTING????? when which valve is opened or closed?????? this is where im lost at.....and you need to make your explanation dummy proof enough for a 17 year old lol thanks! also ive heard something about it has to be at top dead center???? school me please

thanks in advance!!!
 

montegoman351

Member
Jan 12, 2007
169
1
18
May 24, 2007
#2
  • May 24, 2007
  • #2
The lifter must be at the bottom-most part of the lobe.
As in... turn the motor by hand untill the exhaust valve just starts to open, then you adjust the intake valve.
Make any sense yet?
When the exhaust starts to open, the intake is at the bottom-most part of the cam lobe, so then you set the preload 1/2 to 3/4 turn.
 
U

UnderdogGN

New Member
May 7, 2006
74
0
0
May 24, 2007
#3
  • May 24, 2007
  • #3
okay im getting it....so then its vice versa to adjust the exhaust valve? so it would be when the intake valve just starts to open then adjust the exhaust valve correct or no??
thanks
 
R

RioRed4v

New Member
Aug 1, 2003
24
0
0
Las Vegas
May 24, 2007
#4
  • May 24, 2007
  • #4
Here ya go.. this is the writeup I used

http://www.flowtechinduction.com/technical.htm
 
U

UnderdogGN

New Member
May 7, 2006
74
0
0
May 24, 2007
#5
  • May 24, 2007
  • #5
thanks.
so it says adjust the intake valve side when the exhaust side starts to open, and adjust the exhaust when the intake valve is almost closed?
sound ok to everyone?
 

montegoman351

Member
Jan 12, 2007
169
1
18
May 24, 2007
#6
  • May 24, 2007
  • #6


It takes a little while to do them all, but it's worth it.
 
You must log in or register to reply here.

Similar threads

0
V6 to V8 Swap info
  • 02_2v_Curtis
  • Jan 11, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
1K
1996 - 2004 SN95 Mustang -General/Talk- Oct 7, 2026
2v_johnny
2
Tightening upper control arm bushings at ride height dilemma… need some help
  • AnthonyA1234
  • Dec 27, 2024
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
51
Views
7K
Fox 5.0 Mustang Tech Feb 27, 2025
General karthief
6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
5
Views
1K
1965 - 1973 Classic Mustangs -General/Talk- Oct 19, 2026
mattcrp1
M
Engine adjust roller rockers on new 393
  • maxine-70
  • Dec 27, 2023
  • Fox 5.0 Mustang Tech
Replies
16
Views
3K
Fox 5.0 Mustang Tech Dec 30, 2023
AeroCoupe
M
03 GT Misfire at idle only, calling all experts!
  • midnight03
  • Feb 27, 2024
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
936
1996 - 2004 SN95 Mustang -General/Talk- Feb 27, 2024
midnight03
M
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?