Need help with clutch pedal/pedal assembly

I have a 68 and considered a stick swap for a while. What I found is when it comes to clutch pedals, you are pretty much gonna have to pay the price. There aren't too many different options. I saw in another thread that you already have a t5. Do you already have any other parts for the swap like a bell housing, flywheel or anything like that ?

Get yourself asset of pedals and do the clutch cable conversion. It's easy.

You only really need the clutch pedal. I paid $10 for one on ebay. I was lucky and found a manual trans brake pedal for another $10, but you can always cut the auto trans brake pedal down and cover it with a rubber pad, nobody will know the difference. The bracket they mount to is identical and if you switch to hydraulic clutch you don't need the assist spring. I'll snap some pics of my home-brew clutch set up tonite if I can. I had about $70 in it and it's worked quite well for about 10 years.

Here's all you need: http://rover.ebay.com/rover/1/711-5...0001&campid=5335821607&icep_item=292775819680