need help with coil harness

[jruppert]

I had the harness off from the coil and the wires are a little loose from the connector. There are 2 wires that came out. One connection with 2 wires attached and one connection with one wire attached. I dont want to get these reversed so if anyone knows which way they go I would appreciate it. Thanks in advance.

 

[One Wicked SVT]

if they are reversed they simply wont work...


so if it isnt one way, its another.

went thru the same thing myself.

 

[jruppert]

ok well i was just concerned about shorting something out. good to know, thanks

 

[One Wicked SVT]

i didnt have a problem with shorting anything out personally.

not saying its impossible or not.

 

[89MustangGX]

If you're careful you can use a small screwdriver and push the tab over that holds those metal connectors in the plastic connector -- releasing them. For my truck I had the same thing happen -- so I headed over to the junkyard, grabbed one off another car (they are the same for many years and models), and threw it back on. Good as new.