Ok so I have been having a problem with my stang giving me problems starting and rough acceleration every once in awhile. Sometimes it starts fine and runs perfect, other times it doesn't. So I have a couple questions. First of all I pulled out the distributor and realized that the bottom part has a little bit of play to it. About 1/8" of movement up and down if I move it. Is this normal, or should it be completely still. I have a pic of it here showing where the movement happens.
I also was wondering how it is to reinstall the distributor back in. I have read a couple different threads on this, but I can't seem to figure out what I am feeling for in the spark plug #1 when I am cranking the engine. Also, where is the balancer that I have to check the mark of. Sorry if these are lame questions, but I haven't had experience with this yet on my 5.0 but have some mechanical knowledge and would rather do it myself then pay someone else.
Any info is greatly appreciated. Thanks.
I also was wondering how it is to reinstall the distributor back in. I have read a couple different threads on this, but I can't seem to figure out what I am feeling for in the spark plug #1 when I am cranking the engine. Also, where is the balancer that I have to check the mark of. Sorry if these are lame questions, but I haven't had experience with this yet on my 5.0 but have some mechanical knowledge and would rather do it myself then pay someone else.
Any info is greatly appreciated. Thanks.