Need help with porting and polishing Cobra intake

Slow5.0 · Feb 18, 2004

Here is little bit about polishing Upper Cobra intake ,
Firtst I been tryin 3 hours take off old paint with air craft paint remower
Than I use 80 grit sandpaper 2 hours , continued tomorrow

Firsc pics under below links are nasty intake with Air craft paint remover
here is some pics
http://images.cardomain.com/member_images/...97_239_full.jpg
http://images.cardomain.com/member_images/...97_241_full.jpg
http://images.cardomain.com/member_images/...97_240_full.jpg
http://images.cardomain.com/member_images/...97_238_full.jpg

tmoss · Feb 18, 2004

Those casting surface pits are why Ford put the heavy gray paint coating on these intakes. Most Cobra/Explorer intakes I've stripped have them whereas the 87-93 upper intakes do not - nice pebbled surfaces on those.

Slow5.0 · Feb 21, 2004

OK guys i just finished polishing , this pissed me off ,it's too hard to do but it's not too bad , tomorrow I gonna install u/l intake into my Stang
here is pics how that looks like and here is link for more pics whole port/polishing thing http://www.cardomain.com/memberpage/358997/8

94GTLaserRC · Feb 21, 2004

I dont see black lettering there, like on your web page.

I saw a Cobra Intake with RED lettering, it looked Your car is red, so I would go with red letttering.

RC

Slow5.0 · Feb 21, 2004

'Kiss Me''Kiss Me''Kiss Me''Kiss Me' RC I already painterd in black I just have to clean lettering

SuperDust22 · Feb 21, 2004

That is looking good. Especially for your first time doing this.

94GTLaserRC · Feb 21, 2004

Check this baby out:

RC

1105 · Feb 21, 2004

I want my eddy to look like that.

94GTLaserRC · Feb 21, 2004

Zach, How come you ALWAYS have to end a thread RIGHT after I say something??

RC

1105 · Feb 21, 2004

94GTLaserRC said:
Zach, How come you ALWAYS have to end a thread RIGHT after I say something??

RC

Because you always bring it off topic first

RC

94GTLaserRC · Feb 21, 2004

1105 said:
Because you always bring it off topic first RC

<marquee>ZACH--->View attachment 526849

</marquee>

J/K Bro...Sorry for :OT: Ernie...BACK TO THE THREAD!!!
RC

1105 · Feb 21, 2004

94GTLaserRC said:
ZACH--->

J/K Bro...Sorry for :OT: Ernie...BACK TO THE THREAD!!!
RC

<marquee><img src="http://www.ebaumsworld.com/forumfun/gay14.jpg"></marquee>
I agree, back to Seths thread

Seth, did you use any power tools to sand your intake, or did you do it all by hand?

ARed1995GT · Feb 21, 2004

<marquee><img src=http://www.wickedcold.com/boardpics/homoboth.jpg></marquee>

Sorry... I had to.

clang5oh · Feb 22, 2004

here is where i am on my install. the upper is not mounted yet and it may be another day as i have just seen some nice polishied stuff. all i was gonna do was clean things up real nice and put it on and wait till summer to polish but my eastwood buffing kit is just to my left is whispering "use me, use me".

Slow5.0 · Feb 22, 2004

1105 said:
I agree, back to Seths thread

Seth, did you use any power tools to sand your intake, or did you do it all by hand?

1105 here is the link where you can find more info http://www.cardomain.com/memberpage/358997/8

viperos · Feb 24, 2004

btw ernie, get a vaccume gague on there, and check your pressure... that's my expert advice for the moment... if your pressure is normal, then I have no idea why it seems gutless... sorry...

Slow5.0 · Feb 27, 2004

I just finish polishing stock TB , not too bad fo 45 min job

Slow5.0 · Mar 13, 2004

Hey guys and you RC ,did you remember when I told you if I can do porting/polishing my Cobra intake I gonna try do same with my brothers intake from 96 Probe GT and I did but not just one I make two ported/polished (because my brother buy extra intake so he can drive car until I finish p/p job like I did , but after that I did old one to(factory) so now we have one for sale , not bad
Here is pics before and after (after is both intakes)

94GTLaserRC · Mar 13, 2004

Seth5.0 said:
Hey guys and you RC ,did you remember when I told you

What do you mean "hey guys and you RC"? Im not a guy

LOOKS GOOD, but I have no IDEA what the h3ll that paragraph says
RC

Slow5.0 · Mar 13, 2004

94GTLaserRC said:
What do you mean "hey guys and you RC"? Im not a guy

LOOKS GOOD, but I have no IDEA what the h3ll that paragraph says
RC

That man ,for all of you especially RC (because RC didknow what kinda intake is that)
Never mind

Need help with porting and polishing Cobra intake

Active Member

Gettin Wired

Active Member

Squint as you approach, lest you be blinded by my

Active Member

The Power of Pixie Dust?!

Squint as you approach, lest you be blinded by my

Attachments

I AM the random post master...bow down

Squint as you approach, lest you be blinded by my

I AM the random post master...bow down

Squint as you approach, lest you be blinded by my

I AM the random post master...bow down

New Member

New Member

Active Member

New Member

Active Member

Active Member

Squint as you approach, lest you be blinded by my

Active Member

Similar threads

Privacy & Transparency

Privacy & Transparency