• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

need info for track with new 4.6

  • Thread starter Thread starter 87 blown stang
  • Start date Start date Mar 23, 2004
  • 1
  • 2
Next
1 of 2 Next Last

87 blown stang

Founding Member
Apr 2, 2002
139
0
0
pa
Mar 23, 2004
#1
  • Mar 23, 2004
  • #1
hey guys this is my first mod motor stang. i'm going to the track on sat.. the car has 200mi and will probably have only 250 when i pull in. first things first is this too early? i want to get a baseline in stock setup. second, temp. should be in the mid sixties, it's all stock with a 5spd. walk it out or try to rev and dump? stock radials also. i'm comming from a blown 5.0 so this is a differnt world for me. i have not drove it much but couldn't pass up the track day(local club rented it out). thanks alot
 

White Stang

Member
Feb 11, 2004
467
0
16
Ft Lauderdale
Mar 23, 2004
#2
  • Mar 23, 2004
  • #2
With stock tires you can not start at a rev. you will almost have to feather the clutch to stop the spinning. Hope you can make a few passes. also if you have traction control put a post it on your window to turn of your traction control. If your not use to turning it of you will forget.
 

daver01

Founding Member
Oct 4, 2002
396
0
0
Lexington, Ky
Mar 23, 2004
#3
  • Mar 23, 2004
  • #3
omfg. u have some serious cojones. nice color too.

have had bad luck with dumping on street tires thus far, but i also am a pretty sucky driver, at least thus far in my 3 wk. legal racing career.

i have best luck thus far slipping the clutch as u roll into the throttle, but your car is new, so no way would i do that. just go from idle or slightly above and see how she does for u. and work up from there.

i never went to the track when i had stock gears or stock tires, so ?
 
1

1stGT

New Member
Mar 3, 2004
0
0
0
Arizona
Mar 23, 2004
#4
  • Mar 23, 2004
  • #4
I've wondered the same things for my first trip down the lane.
Let us know what you try,
and how well it works for you!

Mark
 

87 blown stang

Founding Member
Apr 2, 2002
139
0
0
pa
Mar 25, 2004
#5
  • Mar 25, 2004
  • #5
thanks for the help. i will post all info sat. night! hopefully no broken parts to report. this should be interesting, this thing is stock stock. i had the same problem in my old 5.0. i was on radials and kept trying to dump the clutch. twice i walked it out but slammed 2nd and spun like hell! same with third. what kind of numbers should i be looking for?
 

WhiteDevil69

New Member
Sep 15, 2003
518
0
0
Tucson, AZ
Mar 25, 2004
#6
  • Mar 25, 2004
  • #6
87 blown stang said:
thanks for the help. i will post all info sat. night! hopefully no broken parts to report. this should be interesting, this thing is stock stock. i had the same problem in my old 5.0. i was on radials and kept trying to dump the clutch. twice i walked it out but slammed 2nd and spun like hell! same with third. what kind of numbers should i be looking for?
Click to expand...
until you get used to the car and the tires i'd say mid 15's... I ran a 16 flat with 380mi on the car...new best is 14.8, haven't ran with the gears/tires/exhaust.. Should be able to get to mid/low 14's but thats with perfect driving and conditions.. I'd look for high 14's as a goal for the first trip out.
 

Jackie Chan

I didn't read this.
Founding Member
Oct 17, 2002
2,507
4
48
Orlando, FL
Mar 25, 2004
#7
  • Mar 25, 2004
  • #7
are you pretty experienced at the drag strip?
 

87 blown stang

Founding Member
Apr 2, 2002
139
0
0
pa
Mar 25, 2004
#8
  • Mar 25, 2004
  • #8
not really. i was at the track once with my old car. my numbers should tell that.
12.55 @ 115.9 60ft was like 2.2 or 2.3 i forget
this was a 5.0 with p1sc @11lbs trickflows and every other part you could change. i think i'm ganna start by rolling out easy but play around later in the day. biggest thing i don't want to break anything. when i had the 5.0 there last pass blew both headgaskets(too much timming not enough octane) stripped it to put a cage in and lost interest, parted it out. now i'm starting over
 

cap42

New Member
Jul 23, 2003
398
0
0
Bolingbrook IL
Mar 25, 2004
#9
  • Mar 25, 2004
  • #9
IF you can get good at slipping the clutch the best 60'' you can possibly see is a 1.9 on stock rubber but it takes alot of practice expect more along the lines of 2.2-2.3 60's if the temps are good and not much humidity and you can drive it decent from there I would say a 14.1-14.5 will be the best you can do. Shift about 5500-5700 rpms anything out of that and you'll be past the stock powerband and lose mph and slow your e/t down.

Practice your launching that will be the hardest part to overcome. Your gonna have to slip the piss outta that clutch I'd recommend starting about 3500-4000rpms on the launch and just slip it from the light.

Good luck let us know how ya do
 
D

D.K

Founding Member
Jun 17, 2002
1,011
0
36
MD
Mar 25, 2004
#10
  • Mar 25, 2004
  • #10
If you're not good at slipping the clutch, launch low...around 1700RPM or so.
 

Jackie Chan

I didn't read this.
Founding Member
Oct 17, 2002
2,507
4
48
Orlando, FL
Mar 25, 2004
#11
  • Mar 25, 2004
  • #11
cap42 said:
IF you can get good at slipping the clutch the best 60'' you can possibly see is a 1.9 on stock rubber but it takes alot of practice expect more along the lines of 2.2-2.3 60's if the temps are good and not much humidity and you can drive it decent from there I would say a 14.1-14.5 will be the best you can do. Shift about 5500-5700 rpms anything out of that and you'll be past the stock powerband and lose mph and slow your e/t down.

Practice your launching that will be the hardest part to overcome. Your gonna have to slip the piss outta that clutch I'd recommend starting about 3500-4000rpms on the launch and just slip it from the light.

Good luck let us know how ya do
Click to expand...
1.8 on stock rubber is attainable.
 

87 blown stang

Founding Member
Apr 2, 2002
139
0
0
pa
Mar 25, 2004
#12
  • Mar 25, 2004
  • #12
ok guys you all have given very good info. i have noticed that it feels like it starts to nose over around 5500. i'll post again sat night with all the info. this way you guys won't have to look for the post. i'll even post if the nubers are bad. hey everyone has to start somewhere. as far as slippin the clutch, i owned a civic si for a brief stint(saving for the stang) i was able to get that down to 15.4 from 16.6. all numbers were from a gtech. do know how accurate but it was down on the same road, so the improvement was still there. we'll have to wait and see. i think my biggest problem is ganna be the 1st to 2nd shift, no matter how many times i tell myself i allways stab the clutch and slam it home. kinda like a wimpy powershift. but on the test drive with t/c turned off she turned sideways. that was kinda cool. they let me take the car by myself. (i know the owner of the dealership) talk to you all on sat. bob
 

ToplessStang

Member
Mar 7, 2004
591
0
17
Montreal, Canada
Mar 25, 2004
#13
  • Mar 25, 2004
  • #13
When I picked up my 03 Vert last fall, I hit the dragstrip the next day. The only thing I did before going was pull out the silencer. My best run was a 14.2 on a very cold track. Your biggest problem will not be the 1st to 2nd shift trust me. It's the 2nd to 3rd shift that feels like it takes 3 mins. on the track. You should get an even better time seeing that my Vert with the Mach 1000 system is pretty heavy. Just go and have fun. Your times will improve as you do more runs. I can't wait to go back this spring. That night I went was the last night of the year that the track was open. .
 

87 blown stang

Founding Member
Apr 2, 2002
139
0
0
pa
Mar 27, 2004
#14
  • Mar 27, 2004
  • #14
ok we got rained out. they let us make some untimmed passes but not from a stop. all were rolling. we were trying to dry out the track. 1st to 2nd was tricky but i missed third twice. we got resceduled till tomarrow. it's ganna be nice and sunny, so check back tomarrow. bob
 

JonJon

Founding Member
Aug 16, 2002
4,801
1
68
back in Marylands
Mar 27, 2004
#15
  • Mar 27, 2004
  • #15
87 blown stang said:
ok we got rained out. they let us make some untimmed passes but not from a stop. all were rolling. we were trying to dry out the track. 1st to 2nd was tricky but i missed third twice. we got resceduled till tomarrow. it's ganna be nice and sunny, so check back tomarrow. bob
Click to expand...
gluck!
 
N

neuf

Member
May 14, 2003
37
0
6
Mar 27, 2004
#16
  • Mar 27, 2004
  • #16
87 blown stang said:
ok we got rained out. they let us make some untimmed passes but not from a stop. all were rolling. we were trying to dry out the track. 1st to 2nd was tricky but i missed third twice. we got resceduled till tomarrow. it's ganna be nice and sunny, so check back tomarrow. bob
Click to expand...

So you were the guy with the brand spanking new car, I couldn't forget that. I see guys running 14.4-13.9 stock at keystone. So what are your plans for that car?
 

87 blown stang

Founding Member
Apr 2, 2002
139
0
0
pa
Mar 27, 2004
#17
  • Mar 27, 2004
  • #17
nuef, i guess you were there also. i think i remember c-ing your car. going back tomarrow? are you running the magnaflows or packs? make sure you come over i want to hear your car, i'm thinking of running magnapacks. the future is a little hazy right now. i just got my old car back yesterday. it needs a motor and tranny but has full suspension done, gears, and an 8pt cage.. so i'll probably build that one again. i was ganna do long tubes with o/r x and magnapacks and use alittle spray. i did the blower thing on my old car, just looking at trying something new. later bob
 

87 blown stang

Founding Member
Apr 2, 2002
139
0
0
pa
Mar 28, 2004
#18
  • Mar 28, 2004
  • #18
here we go:
temp was 70 with humidity @ 48
60' 2.04
1/4 14.1
mph 96.1
this was my best run. temp went up alittle and i wasn't lettin the car cool down and ran three 14.6's @ 93mph.
i was pretty happy with the 14.1. the car had 300mi on it, and yes i was slippin the clutch. i tried differnt launches but ended up with the 14.6's.
 
R

Ready4this96

New Member
Dec 11, 2003
105
0
0
Clinton Twp., MI
Mar 28, 2004
#19
  • Mar 28, 2004
  • #19
That's a good baseline, very respectable
 

87 blown stang

Founding Member
Apr 2, 2002
139
0
0
pa
Mar 28, 2004
#20
  • Mar 28, 2004
  • #20
it seemed as though i was loosing some time when i ran it up to 5500. on the 14.1 i shifted alittle shorter around 5000. also it seemed like it took forever to get through 3rd. i'm guessing gears are in order. hey nuef what did you end up with? did you try the right lane? i left after we were talking on the return road.
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

J
Progress Thread Family member 1989 GT- Backstory and updates
  • JRC99
  • Apr 19, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
15
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 26, 2025
JRC99
J
Newbie
  • GalacticPonage
  • Jan 19, 2017
  • The Welcome Wagon
Replies
4
Views
2K
The Welcome Wagon Jan 22, 2017
Davedacarpainter
  • Locked
Just Some Suggestion's For Foxes
  • Detroiit
  • Jul 24, 2014
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 25, 2014
Noobz347
Progress Thread Almost ready for the road, Need input for parts!
  • jpope417
  • Apr 19, 2013
  • Fox 5.0 Mustang Tech
  • 2
Replies
30
Views
5K
Fox 5.0 Mustang Tech Sep 24, 2013
jpope417
Progress pics and going to the track tonight.
  • 90mustangGT
  • Jul 29, 2011
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
9
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 30, 2011
LarsD
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?