• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Need Major Help, Please...

  • Thread starter Thread starter 97&67_Stang
  • Start date Start date May 22, 2005
9

97&67_Stang

New Member
Aug 4, 2004
15
0
0
May 22, 2005
#1
  • May 22, 2005
  • #1
I just installed a 2004 engine in my 97 GT. I bought it from Mustang Parts Spec. in GA. They said it was a good engine and ran well.

The engine runs great! But, the problem is that when I really get on it I get blue smoke coming out the exhaust. Its not all the time. If I drive normal I do not get any smoke (wife followed and confirmed).

I think the problem is the PCV system. The 2004 has an electrical connector where my 97 engine had an actual PCV valve. When I installed the engine I just left the 2004 valve covers on and left that solenoid in unplugged.

Could this be why under heavy accelleration I get the blue smoke? Am I sucking it through this 2004 electric solenoid (not sure what it is for).

Thanks in advance for the input.

Don Nagel
 
9

97&67_Stang

New Member
Aug 4, 2004
15
0
0
May 22, 2005
#2
  • May 22, 2005
  • #2
????????
 
K

Kilgore Trout

Fried or Broiled ?
10 Year Member
Mar 30, 2005
4,749
95
134
May 22, 2005
#3
  • May 22, 2005
  • #3
Wha? The 2004 engine should have a pcv valve... It should route to the throttle body.
 
G

green_fow_six

Founding Member
Jan 21, 2002
310
0
16
Martinez, CA
May 22, 2005
#4
  • May 22, 2005
  • #4
the 2001 motor I swapped in had the pcv in the same place as my 96? The one on the passenger side Valve cover.
 

Mike97gt

it doe snot
Founding Member
Jan 26, 1999
10,633
7
89
the people's republic of massachusetts
May 22, 2005
#5
  • May 22, 2005
  • #5
97&67_Stang said:
I just installed a 2004 engine in my 97 GT. I bought it from Mustang Parts Spec. in GA. They said it was a good engine and ran well.

The engine runs great! But, the problem is that when I really get on it I get blue smoke coming out the exhaust. Its not all the time. If I drive normal I do not get any smoke (wife followed and confirmed).

I think the problem is the PCV system. The 2004 has an electrical connector where my 97 engine had an actual PCV valve. When I installed the engine I just left the 2004 valve covers on and left that solenoid in unplugged.

Could this be why under heavy accelleration I get the blue smoke? Am I sucking it through this 2004 electric solenoid (not sure what it is for).

Thanks in advance for the input.

Don Nagel
Click to expand...




ok can you take a picture of this valve cover. and for now swap that valve cover with the one from your 97 motor and put in the PCV valve. thats probally your problem

but i really want too see this 'connector' you are talking about.
 

mity2

I like Pro3 and all I got was this crappy CT.
Jul 24, 2003
2,872
3
48
StateCollege PA
May 22, 2005
#6
  • May 22, 2005
  • #6
u know it could be worn rings too....
 

Mike97gt

it doe snot
Founding Member
Jan 26, 1999
10,633
7
89
the people's republic of massachusetts
May 23, 2005
#7
  • May 23, 2005
  • #7
mity2 said:
u know it could be worn rings too....
Click to expand...

that would do it all the time. and i have a very very very hard time beliving a 04 motor would have worn rings.
 

mity2

I like Pro3 and all I got was this crappy CT.
Jul 24, 2003
2,872
3
48
StateCollege PA
May 23, 2005
#8
  • May 23, 2005
  • #8
No if its miner worn, it'll do it only under heavy load. And are we sure that this is really 04 engine? sometimes there are less then credible used engine place outthere u know?

i could be wrong tho.
 
9

97&67_Stang

New Member
Aug 4, 2004
15
0
0
May 23, 2005
#9
  • May 23, 2005
  • #9
I'll take a picture tomorrow so everyone can see what I'm talking about.

I don;t think its the rings, the engine came from Mustanbg Parts Spec. out of GA and they are a very reputiable mustang salvage reseller. Also, the engine runs so strong that low compression would effect it performance.

My hypothesis is that under the extreme loads, more oil is going tothe heads, when this happens oil is being sucked into the intake through this electric PCV valve which I am not controling. Once this happens when I slow down (High engine vacuum) I see the smoke.

So if I simple swap out valve covers and use the old mechanical PCV valve I hope everything will be okay...

If anyone knows how this 2004 PCV Valve works please let me know.

DCN
 

Give Me TP

Member
Jun 17, 2004
936
0
16
Republic of Texas
May 23, 2005
#10
  • May 23, 2005
  • #10
Use a catch can
 

Mike97gt

it doe snot
Founding Member
Jan 26, 1999
10,633
7
89
the people's republic of massachusetts
May 23, 2005
#11
  • May 23, 2005
  • #11
97&67_Stang said:
I'll take a picture tomorrow so everyone can see what I'm talking about.

I don;t think its the rings, the engine came from Mustanbg Parts Spec. out of GA and they are a very reputiable mustang salvage reseller. Also, the engine runs so strong that low compression would effect it performance.

My hypothesis is that under the extreme loads, more oil is going tothe heads, when this happens oil is being sucked into the intake through this electric PCV valve which I am not controling. Once this happens when I slow down (High engine vacuum) I see the smoke.

So if I simple swap out valve covers and use the old mechanical PCV valve I hope everything will be okay...

If anyone knows how this 2004 PCV Valve works please let me know.

DCN
Click to expand...


i agree.. the chnces of major engine damage on a 04 motor is very very small. plus the compression would be down.

i have never seen this PCV valve you are talking about. thats why i need a pic. but you do need some sort of PCV system hooked up. thats whats causing your problem. without the system hooked up. crankcase presure will cause the rings too flutter and loose contact with the cyl walls.

the 04 might use the new style connector for the pcv system. some newer models have a screw in pcv that is better for evap emmisions.
 
9

97&67_Stang

New Member
Aug 4, 2004
15
0
0
May 23, 2005
#12
  • May 23, 2005
  • #12
???
 
G

green_fow_six

Founding Member
Jan 21, 2002
310
0
16
Martinez, CA
May 23, 2005
#13
  • May 23, 2005
  • #13
97&67_Stang said:
???
Click to expand...

How about some pictures?
 

AdRock

Member
Nov 13, 2003
521
1
19
South Texas
May 23, 2005
#14
  • May 23, 2005
  • #14
It could be the valve seals. I've seen cars that won't smoke under normal driving (at least not enough to notice) but wil give a good puff when romped on.
 
9

97&67_Stang

New Member
Aug 4, 2004
15
0
0
May 25, 2005
#15
  • May 25, 2005
  • #15
Ttt
 

AirWolf87

New Member
Mar 14, 2004
382
0
0
L I, NY
May 25, 2005
#16
  • May 25, 2005
  • #16
Your theory sounds about right to me. on 04 motors, that valve was illiminated. Thats why some intake components for 96-03 mustangs are slightly different from 04s. Blue smoke = burning oil. some pics of that valve you wrigged would help.
 
9

97&67_Stang

New Member
Aug 4, 2004
15
0
0
May 31, 2005
#17
  • May 31, 2005
  • #17
Wanted to say thanks, and update for those who took the time to answer...

The electrical connector that is on the '04 engine is used in the advanced EVAP system test performed by the ECU. There is still a valve, it just has an added elec. connection. Therefore by just utilizing the remaining valve cover and valve the PCV system is functioning mechanically okay.

The smoke...was from another source. I bought the engine from Mustang Parts Specialties in GA. After my concern grew over the amount of smoke I called them, explained the situation, and was routed to the owner of the facility, Greg. After talking with Greg I found out the engine I bought was out of a rolled '04 GT. We determined that it had most likely set upside down for an extended period before his place bought it, therefore the oil worked its was into the top of the engine and sat. When they flipped the car it all ran back into the pan. They ran it for a few minutes to make sure it did not knock, which it never. And set it on their shelf for sale.

Here is where I come in, after running it and getting it up to operating temp, the oil that had coated the entire upper intake and head system from the flip started to burn off. At Gregs request he wanted me to take the car out and drive it for about 200 miles. I did and.....All is well.

The guys at MPS are GREAT, and I would recommend that in the future if used parts are needed, you should consider them FIRST!.

Thanks everyone for the input.
 

AirWolf87

New Member
Mar 14, 2004
382
0
0
L I, NY
Jun 1, 2005
#18
  • Jun 1, 2005
  • #18
awsome. glad everything worked out. And its nice to see a company being so helpfull to their customers. when im done paying my car off im going to have a choice to make...either trade it in, or swap a 4v engine in it....if i decide to, i def. know who to call.
 
You must log in or register to reply here.

Similar threads

Engine Random Misfire at idle.
  • Gulftown980x
  • Jul 29, 2026
  • SN95 4.6L Mustang Tech
Replies
11
Views
610
SN95 4.6L Mustang Tech Jul 31, 2026
squeak93
Electrical problem plug in the drivers kick panel
  • Mindseye007
  • Aug 16, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
235
Fox 5.0 Mustang Tech Aug 16, 2026
Mindseye007
T
2002 V6 3.8L Help Me
  • TheIncompetentMechanic
  • Apr 4, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • 2 3
Replies
50
Views
2K
1996 - 2004 SN95 Mustang -General/Talk- May 12, 2026
TheIncompetentMechanic
T
S
Fuel ‘88 GT Runs Rich Cold — Fixes Itself When I Unplug Sensors (ECT, MAF, O2, etc.)
  • Sufarry
  • Nov 6, 2025
  • Fox 5.0 Mustang Tech
Replies
12
Views
1K
Fox 5.0 Mustang Tech Nov 9, 2025
Mustang5L5
M
01 mustang 3.8 fuel pressure issue
  • Mhaley2006
  • May 29, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
4
Views
530
1996 - 2004 SN95 Mustang -General/Talk- Aug 9, 2026
JohnKay
J
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?