Need Major Help, Please...

97&67_Stang

New Member
Aug 4, 2004
15
0
0
I just installed a 2004 engine in my 97 GT. I bought it from Mustang Parts Spec. in GA. They said it was a good engine and ran well.

The engine runs great! But, the problem is that when I really get on it I get blue smoke coming out the exhaust. Its not all the time. If I drive normal I do not get any smoke (wife followed and confirmed).

I think the problem is the PCV system. The 2004 has an electrical connector where my 97 engine had an actual PCV valve. When I installed the engine I just left the 2004 valve covers on and left that solenoid in unplugged.

Could this be why under heavy accelleration I get the blue smoke? Am I sucking it through this 2004 electric solenoid (not sure what it is for).

Thanks in advance for the input.

Don Nagel
 
97&67_Stang said:
I just installed a 2004 engine in my 97 GT. I bought it from Mustang Parts Spec. in GA. They said it was a good engine and ran well.

The engine runs great! But, the problem is that when I really get on it I get blue smoke coming out the exhaust. Its not all the time. If I drive normal I do not get any smoke (wife followed and confirmed).

I think the problem is the PCV system. The 2004 has an electrical connector where my 97 engine had an actual PCV valve. When I installed the engine I just left the 2004 valve covers on and left that solenoid in unplugged.

Could this be why under heavy accelleration I get the blue smoke? Am I sucking it through this 2004 electric solenoid (not sure what it is for).

Thanks in advance for the input.

Don Nagel




ok can you take a picture of this valve cover. and for now swap that valve cover with the one from your 97 motor and put in the PCV valve. thats probally your problem

but i really want too see this 'connector' you are talking about.
 
No if its miner worn, it'll do it only under heavy load. And are we sure that this is really 04 engine? sometimes there are less then credible used engine place outthere u know?

i could be wrong tho.
 
I'll take a picture tomorrow so everyone can see what I'm talking about.

I don;t think its the rings, the engine came from Mustanbg Parts Spec. out of GA and they are a very reputiable mustang salvage reseller. Also, the engine runs so strong that low compression would effect it performance.

My hypothesis is that under the extreme loads, more oil is going tothe heads, when this happens oil is being sucked into the intake through this electric PCV valve which I am not controling. Once this happens when I slow down (High engine vacuum) I see the smoke.

So if I simple swap out valve covers and use the old mechanical PCV valve I hope everything will be okay...

If anyone knows how this 2004 PCV Valve works please let me know.

DCN
 
97&67_Stang said:
I'll take a picture tomorrow so everyone can see what I'm talking about.

I don;t think its the rings, the engine came from Mustanbg Parts Spec. out of GA and they are a very reputiable mustang salvage reseller. Also, the engine runs so strong that low compression would effect it performance.

My hypothesis is that under the extreme loads, more oil is going tothe heads, when this happens oil is being sucked into the intake through this electric PCV valve which I am not controling. Once this happens when I slow down (High engine vacuum) I see the smoke.

So if I simple swap out valve covers and use the old mechanical PCV valve I hope everything will be okay...

If anyone knows how this 2004 PCV Valve works please let me know.

DCN


i agree.. the chnces of major engine damage on a 04 motor is very very small. plus the compression would be down.

i have never seen this PCV valve you are talking about. thats why i need a pic. but you do need some sort of PCV system hooked up. thats whats causing your problem. without the system hooked up. crankcase presure will cause the rings too flutter and loose contact with the cyl walls.

the 04 might use the new style connector for the pcv system. some newer models have a screw in pcv that is better for evap emmisions.
 
Your theory sounds about right to me. on 04 motors, that valve was illiminated. Thats why some intake components for 96-03 mustangs are slightly different from 04s. Blue smoke = burning oil. some pics of that valve you wrigged would help.
 
Wanted to say thanks, and update for those who took the time to answer...

The electrical connector that is on the '04 engine is used in the advanced EVAP system test performed by the ECU. There is still a valve, it just has an added elec. connection. Therefore by just utilizing the remaining valve cover and valve the PCV system is functioning mechanically okay.

The smoke...was from another source. I bought the engine from Mustang Parts Specialties in GA. After my concern grew over the amount of smoke I called them, explained the situation, and was routed to the owner of the facility, Greg. After talking with Greg I found out the engine I bought was out of a rolled '04 GT. We determined that it had most likely set upside down for an extended period before his place bought it, therefore the oil worked its was into the top of the engine and sat. When they flipped the car it all ran back into the pan. They ran it for a few minutes to make sure it did not knock, which it never. And set it on their shelf for sale.

Here is where I come in, after running it and getting it up to operating temp, the oil that had coated the entire upper intake and head system from the flip started to burn off. At Gregs request he wanted me to take the car out and drive it for about 200 miles. I did and.....All is well.

The guys at MPS are GREAT, and I would recommend that in the future if used parts are needed, you should consider them FIRST!.

Thanks everyone for the input.
 
awsome. glad everything worked out. And its nice to see a company being so helpfull to their customers. when im done paying my car off im going to have a choice to make...either trade it in, or swap a 4v engine in it....if i decide to, i def. know who to call.