• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

need more go

  • Thread starter Thread starter blue87lx
  • Start date Start date Feb 4, 2006
B

blue87lx

New Member
Apr 23, 2005
175
0
0
Feb 4, 2006
#1
  • Feb 4, 2006
  • #1
my car has a 347e chp longblock stage 2 cam trickflow upper and lower full exhuast 24lb injectors full msd ignition tremec trans 4.10 rear custom tune and i want more. a supercharger is alot of money and i have a zex nitrous kit off my old lx i thought about putting on but im worried about ruining somthing with this motor with the amount of money i got into it. any suggestions?
 

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
2
58
Port Elgin, Ontario
Feb 4, 2006
#2
  • Feb 4, 2006
  • #2
wouldn't a turbo kit be a cheaper way to go insteat of a S/C. you could spray a small shot of NOS if already have the zex kit.
 
I

IntenseBlue

Member
Jul 10, 2005
946
0
16
Feb 4, 2006
#3
  • Feb 4, 2006
  • #3
Hell no. Turbos are about a grand more at least.
 

87_stang

Member
Dec 12, 2005
131
0
16
Tonganoxie, KS
Feb 4, 2006
#4
  • Feb 4, 2006
  • #4
I wouldn't think the spray would hurt your engine. Just keep it down around 150 shot or less. Your built engine should be fine. How much HP and torque is the car putting down with your setup now?
 

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
2
58
Port Elgin, Ontario
Feb 4, 2006
#5
  • Feb 4, 2006
  • #5
IntenseBlue said:
Hell no. Turbos are about a grand more at least.
Click to expand...

TURBO

TURBO

CHARGER

CHARGER

I don't know much about this stuff but I always thought Turbo's were cheaper
 

91ghp5.0

Active Member
May 25, 2005
42
0
28
Somewhere
Feb 5, 2006
#6
  • Feb 5, 2006
  • #6
turbo kits for 302 fords run about 4.5k to 5k. you can get a vortech/paxton (or anything) kit for stangs for much, much cheaper (usually in the 2-3k range). and hows that CHP longblock working for ya? i'd LOVE to get my hands on one of those.
 

Grn92LX

Fidanza Man!
Founding Member
Jan 14, 2001
6,819
64
129
New York
Feb 5, 2006
#7
  • Feb 5, 2006
  • #7
What heads do you have? I would NOT turbo or supercharge a stock block stroker engine.
 
B

blue87lx

New Member
Apr 23, 2005
175
0
0
Feb 5, 2006
#8
  • Feb 5, 2006
  • #8
its not a stock block. i have twisted wedge heads and trick flow intake. i was told the block will handle 10 psi with the stroker
 
You must log in or register to reply here.

Similar threads

SOLD For Sale '92 LX Street/Drag car - WV
  • MikeyMustang
  • Apr 12, 2025
  • Fox Body Mustangs For Sale (1979-93)
Replies
4
Views
2K
Fox Body Mustangs For Sale (1979-93) Dec 31, 2025
MikeyMustang
Engine 1990 LX 5.0L EFI Mustang Fuel Management Problems - HELP!
  • 5.0LXStanger
  • May 25, 2025
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
45
Views
2K
Fox 5.0 Mustang Tech Jul 11, 2025
5.0LXStanger
Engine HELP - 351W Based Build Under Stock Hood
  • thinkfaster
  • Oct 17, 2024
  • Fox 5.0 Mustang Tech
Replies
13
Views
1K
Fox 5.0 Mustang Tech Dec 31, 2025
Qtrhrse23
Q
Hello Mustang Modders
  • drofdeath
  • Oct 6, 2023
  • The Welcome Wagon
Replies
1
Views
581
The Welcome Wagon Oct 6, 2023
General karthief
H
Drivetrain 4R70W clutch friction/metals/piston set up questions for transmission guru
  • Hizdudeness
  • Apr 4, 2024
  • Fox 5.0 Mustang Tech
Replies
2
Views
941
Fox 5.0 Mustang Tech Nov 15, 2024
slow84lx
S
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?