Need paint and bodywork done, anyone?

281pony · Jul 28, 2009

my hood came up on my 89 lx today. roof needs work, and the cowl area behind hood. i want "driver" paint. nothing show room, and nothing junk. just decent paint.

i also have a front bumper i need resprayed, no flex agent was used i dont believe. as well as the rear bumper, but its pretty decent overall.

i know andy use to paint, i need someone who does this on the side so it wont kill me $$ wise. shoot me a pm or reply here if your up for it.. hood will be here soon, i might even just need it primered flat black for the time being.

Bottle Fed · Jul 28, 2009

Mikes Rides in buckley WA did pretty much the exact same thing to my car for 600! here is a link to what he did and everything

MySpace.com - Mikes Rides - 35 - Male - buckley, Washington - myspace.com/mikesridescustoms
Mikes Rides's RYAN'S HATCH!!! Photo Album - MySpace Photos <--direct link to how he did my car with over 60 photos so you can see the work

281pony · Jul 28, 2009

hes full until september? damn.. im hoping to get it done sooner then that, never know though.

f4fntm · Jul 31, 2009

Hey John - oh SHIrT, another Fox, eh? Too bad about the hood, that's a real PITA (read: expensive) to fix.

About the front bumper: "no flex agent" is code for "poor prep". Ask the guys at Autopaint downtown, they're the ones who told me. I added nothing extra when I painted the polyurethane on my notch, and it sticks just fine, cuz I put in the time on preparation.

281pony · Jul 31, 2009

hey lee, i tried emailing you. it went through, but i guess to the wrong address?

im hoping i can get the body work done reasonably priced, but probably not. if its too expensive, i will just leave the damage and go to the engine some more.

this weekend is black interior conversion, pulling dash out to put blower boxes/heater core back in, dropping tank for a new 255/fuel sending unit, and wiring up my gauges...

last week was topend, march pulley kit, new clutch/tob/pilot, new carpet. been ALOT of work..

Mustang78 · Aug 1, 2009

281pony said:
last week was topend, march pulley kit, new clutch/tob/pilot, new carpet. been ALOT of work..

You're welcome haha, see ya at 8ish in the morning, i should get to sleep.... up almost all last night on a house fire, Later

281pony · Aug 1, 2009

Mustang78 said:
You're welcome haha, see ya at 8ish in the morning, i should get to sleep.... up almost all last night on a house fire, Later

im up too..

but yea thanks for all the help. its gonna suck without love line to listen to while we wrench haha.

281pony · Nov 1, 2009

bumping this back up...

i have just a hood i need painted. fiberglass hood, seems to be reasonably smooth. i just want it done oem white. so prep work doesn't need to be perfect.

i don't need a showroom paint job, just something "decent".

ill be taking it to some random shop if nobody emerges privately.

mikevm78 · Nov 2, 2009

PM sent

pw91lx · Feb 8, 2011

I could use the same info for a a front clip and drivers door. I'm in the Tacoma area. The parts came off of a donor car so they'll need to have the color changed. Let me know if you know someone who can help

zombiebrew · Oct 5, 2011

Hello everyone! I've got a 66 coupe that needs some body work. I've got a little bit of rust in the back passenger side where the top meets the body and a few small spots arround the trunk key hole. I found my car on Brad's custom auto. I guess that was where my neighbor got it painted.

http://bradscustomauto.com/works/mus...m=5&gallery=36

I have a big flake (3 in by 12 in) that has a small spot of rust but mostly clean sheet metal that's now exposed underneath. Is this something that should lead me away from this body shop or is this something that sometimes happens?

And if Brad's did some shabby work is there another body shop in the Seattle area i should look into? Oh and it's Ivy Green right now but i LOVEEEEEEE the way a nice shiny black looks. How much more is it about to get it repainted a new color vice a new coat of green?

1989DropTop · Oct 25, 2011

I do my own paint and body take a look at my 89lx convert build thread to see my current job. Brian

1989DropTop · Oct 25, 2011

zombiebrew said:
Hello everyone! I've got a 66 coupe that needs some body work. I've got a little bit of rust in the back passenger side where the top meets the body and a few small spots arround the trunk key hole. I found my car on Brad's custom auto. I guess that was where my neighbor got it painted.

http://bradscustomauto.com/works/mus...m=5&gallery=36

I have a big flake (3 in by 12 in) that has a small spot of rust but mostly clean sheet metal that's now exposed underneath. Is this something that should lead me away from this body shop or is this something that sometimes happens?

And if Brad's did some shabby work is there another body shop in the Seattle area i should look into? Oh and it's Ivy Green right now but i LOVEEEEEEE the way a nice shiny black looks. How much more is it about to get it repainted a new color vice a new coat of green?

Zombie, it all depends on how much you are wanting done. I.E. changing paint color is all good until you open a door and have a green jamb or trunk lid under hood fire wall etc... the paint it self is fairly reasonable the prep work for a black car has to be perfect as every little nick and ding shows. Any reputable shop it will be the same rice as any other paint job. But again they better know what they are doing when it comes to the prep work. if your up north which I am assuming you are check out Wythors and see who he suggest. Another suggesttion I would make is go to your local Wesco or any autobody paint suply store and ask the delivery driver who does good work. Reason I saay the delivery driver is they are the ones that drop off all of the supplies to the local shops. The driver usually sees what kind of work is being put out of each shop. I fyou still can't find anything give me a call I will do some caling for you. Brian

TurboNoong · Jan 11, 2012

Some of you might remember Nick, he use to run around with us back in the day up here in the northend, he had a fox as well a a galaxy. Well, he does real nice work and has a shop in Kenmore give him a ring his number is 425-346-2550.

God Damn, I remember when my hood came up on me. EF

WANNA_BE_GT · Jan 11, 2012

TurboNoong said:
Some of you might remember Nick, he use to run around with us back in the day up here in the northend, he had a fox as well a a galaxy. Well, he does real nice work and has a shop in Kenmore give him a ring his number is 425-346-2550

.

God Damn, I remember when my hood came up on me. EF

I remember that night We heard your car and then it all just went quiet

Ethereal Zer0 · Jan 12, 2012

Lol boost, corner, wet? I still can't believe the night your hood came up was the first night I hung out with you guys, lol what an introduction to the mustang community... Pretty sure that is how I knew I had found the right spot .

TurboNoong · Jan 12, 2012

hahaha, it was a very interesting night thats for sure. I was told thats when Will decided to go turbo with his car.

tehredblur · Aug 24, 2012

Oh man, is Andy still around? haha

I need sooo much body work you guys, like whole radiator support and probably all the frame forward of the strut towers.

Vortech88GT · Oct 4, 2012

Bringing this baby back up to the top... Does anyone have suggestions for a good local paint shop? I'm looking to get a bumper cover painted.

Need paint and bodywork done, anyone?

281pony

Active Member

Bottle Fed

New Member

281pony

Active Member

f4fntm

New Member

281pony

Active Member

Mustang78

New Member

281pony

Active Member

281pony

Active Member

mikevm78

Member

pw91lx

New Member

zombiebrew

New Member

1989DropTop

Active Member

1989DropTop

Active Member

TurboNoong

WANNA_BE_GT

Ethereal Zer0

TurboNoong

tehredblur

New Member

Vortech88GT

New Member

Similar threads

Need paint and bodywork done, anyone?

Active Member

New Member

Active Member

New Member

Active Member

New Member

Active Member

Active Member

Member

New Member

New Member

Active Member

Active Member

New Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency