Need quick response...

[GeLsTaNg215]

Hi, Im going to be changing my stock intake to the cobra intake but the damn cobra intake didnt come with the lower gaskets. Could somebody link me or tell me what size lower gaskets I need? and is there anything else I need besides the upper and lower intake, throttlebody, bolts and gaskets? Thanks in advance!


btw I did a search but my 56k pos comp was to slow to deal with searching lol

 

[90mustangGT]

It takes stock 5.0 part numbers. Or do the 93 Cobra part numbers. Although different, they are actually the same.

 

[88_GT_5_oh]

http://store.summitracing.com/defau...eywordSearch&DDS=1&N=115&target=egnsearch.asp

those?

 

[GeLsTaNg215]

That summit link only has the upper to lower gasket and intake spacers that I see or am I just blind? lol

 

[bill302]

Call Jegs@ 1800 345-4545 Or Summit@ 1800 230-3030 Tell Them What You Have They Will Tell You What Gasket You Need.

 

[joeyd0730]

felpro makes a set for gt-40 lower. has slightly larger ports and comes with correct upper to lower gasket

 

[GeLsTaNg215]

Would this be the right gasket I need below?


Ford Ultra-Seal II Material Intake Manifold Gaskets
302 EFI V8 1986-95
302ci V8 1977-95
1/16'' Thick
Stock Port: 1.25'' x 2.11''

720-825G

 

[tmoss]

A Fel Pro gasket kit for a 96 Explorer will be exactly what you need - find it at any good parts store........

 

[Michael Yount]

Go to your local parts store and ask for gaskets for a 1996 Explorer or Mountaineer 5.0L -- they'll work perfectly.

 

[tmoss]

You should have read to the end Mike - beat ya to it.........

 

[Michael Yount]

I did Tom -- we were posting at about the same time -- your response wasn't listed when I was typing mine....honored to be in your company though....Merry Christmas or Happy Hanukah or have a great day tomorrow depending on your particular persuasions...

 

[tmoss]

Ditto Mike..........

 

[GeLsTaNg215]

Alright thanks alot fellas i'll check out some auto part stores around me. happy holidays! :SNSign: