took the stang to a 1/8th mile track last friday best time was 9.87 at 72 mph.
thats with 245 kuhmos not bad i guess .leaving the line at idle shifting to second at about 3 grand and third around 5500 rpms buddy said i was still spinning at half track.tried hitting 4th gear on my best pass but missed it pretty bad.going back to night gonna get some 100 octane and try and borrow some 10.5`s from a buddy ,if not then i`ll try letting some air out of the wiennys and have fun .hope to get a high to mid 8 second pass in if i get the slicks on .still lots of stuff wanted to add to my setup.here is a list of my mods and some stuff thats still stock. oh yeah it a 87 notch back with speed density but mass air conversion coming soon found a guy with puter ,harness ,and a c@l mass sensor for $300
.512 .533 lift .220 duration comp cams./5 speed 3.73 /egual length headers
.020 shaved off heads 3 angle valve job/offroad h pipe /dual flowmasters
matching double valve springs with the usual head work/
new 19# FMS injectors MSD 6AL 6 grand limiter chip
1.6 ford racing roller rockers new comp push rods sitting on pedastels
stock TB upper/lower starving for more air
thats with 245 kuhmos not bad i guess .leaving the line at idle shifting to second at about 3 grand and third around 5500 rpms buddy said i was still spinning at half track.tried hitting 4th gear on my best pass but missed it pretty bad.going back to night gonna get some 100 octane and try and borrow some 10.5`s from a buddy ,if not then i`ll try letting some air out of the wiennys and have fun .hope to get a high to mid 8 second pass in if i get the slicks on .still lots of stuff wanted to add to my setup.here is a list of my mods and some stuff thats still stock. oh yeah it a 87 notch back with speed density but mass air conversion coming soon found a guy with puter ,harness ,and a c@l mass sensor for $300
.512 .533 lift .220 duration comp cams./5 speed 3.73 /egual length headers
.020 shaved off heads 3 angle valve job/offroad h pipe /dual flowmasters
matching double valve springs with the usual head work/
new 19# FMS injectors MSD 6AL 6 grand limiter chip
1.6 ford racing roller rockers new comp push rods sitting on pedastels
stock TB upper/lower starving for more air