• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

need some advice on this intake

  • Thread starter Thread starter Roland69
  • Start date Start date Oct 20, 2007
  • 1
  • 2
  • 3
Next
1 of 3 Next Last

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
3
58
Port Elgin, Ontario
Oct 20, 2007
#1
  • Oct 20, 2007
  • #1
here is the intake and what he posted about it.

GT40 with edelbrock 70mm TB (NIB) and aluminum rails.

Intake is currently bare aluminum but can be painted prior to sale if desired.


now it's bare aluminum


he is asking $650 OBO cdn. Should I get it.
 

Attachments

  • P1040025.webp
    25.9 KB · Views: 155
  • P2020036.webp
    32.5 KB · Views: 144

BlownFiveLiter

have car, will race....wait, it doesn't run
15 Year Member
Nov 29, 1999
3,133
18
108
Chicagoland
Oct 20, 2007
#2
  • Oct 20, 2007
  • #2
The price seems a bit steep, but if he'll come down under $600, I'd grab it. That's always been my favorite intake for our cars, but I never could find one over the years that was reasonably priced.
 

PUNISHER RACING

Active Member
Aug 27, 2007
1,124
0
36
FORD CITY, PA.
Oct 20, 2007
#3
  • Oct 20, 2007
  • #3
Seems pretty pricey look for an Explorer intake on Ebay I got mine for 350.00 with the 65mm t.b.
 

SuperStang83

Founding Member
Mar 21, 2001
1,693
0
49
Boyertown, Pa
Oct 20, 2007
#4
  • Oct 20, 2007
  • #4
Those intakes are always real expensive, but you don't see the best gains with them. If I were you I would look elsewhere, unless you are really hung up on the looks of the GT40.
 
R

red95gtconvert

New Member
May 29, 2006
382
0
0
Ponca city, OK
Oct 20, 2007
#5
  • Oct 20, 2007
  • #5
I would get it, that doesn't seem like to bad of a deal with the fuel rails and the throttle body, maybe try to talk him down to 600 CDN. I installed a Cobra intake on my car and made some good gains from it. Now on a high reving engine with some bad a** heads on it you maybe limiting power potential but on a fairly stock engine it should help out a quite bit. If you decide you don't like the intake you could always get your money back out of it.
 

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
3
58
Port Elgin, Ontario
Oct 20, 2007
#6
  • Oct 20, 2007
  • #6
he sounds kinof firm on his price. I might be able to get it for $600 since he did say OBO....Or should I save up and get a TFS kit. I wanted to try the intake for a year or 2 than but a TFS kit or another kit.
 

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
3
58
Port Elgin, Ontario
Oct 20, 2007
#7
  • Oct 20, 2007
  • #7
it does look cool though
 

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
3
58
Port Elgin, Ontario
Oct 21, 2007
#8
  • Oct 21, 2007
  • #8
he said $600.....and I doubt it will leave his hands any cheaper
 

bloopbloob

Member
Sep 27, 2006
578
4
16
Alberta
Oct 22, 2007
#9
  • Oct 22, 2007
  • #9
that seems like a lot, but it does look pretty cool though. love the tubular gt40 look. i'm looking for an intake also, but i wouldnt pay $600 for that.
 

Gearbanger 101

Straight Outta Locash
20+ Year Stangneter
Aug 10, 2002
9,457
1,377
234
Ontario, Canada
Oct 22, 2007
#10
  • Oct 22, 2007
  • #10
$600 for the intake, throttle body and large volume fuel rails? Jump on it. Most here aren't considering the fuel rails in this deal. A set of high flow rails alone could run you as much as $200-$300 with fittings. Not to mention in a couple of years, you'll still be able to turn around and sell it for a decent price. Then when you decide to upgrade to a more stout piece and start making some real power, upgrading your fuel system won't be such a worry.
 

bloopbloob

Member
Sep 27, 2006
578
4
16
Alberta
Oct 22, 2007
#11
  • Oct 22, 2007
  • #11
Gearbanger 101 said:
$600 for the intake, throttle body and large volume fuel rails? Jump on it. Most here aren't considering the fuel rails in this deal. A set of high flow rails alone could run you as much as $200-$300 with fittings. Not to mention in a couple of years, you'll still be able to turn around and sell it for a decent price. Then when you decide to upgrade to a more stout piece and start making some real power, upgrading your fuel system won't be such a worry.
Click to expand...

well you can get a brand new bbk ssi for around $700 with a tb and fuel rails....( yeah yeah i'm sure everyone's going to say its crap, but some have had good luck with it)
 

Gearbanger 101

Straight Outta Locash
20+ Year Stangneter
Aug 10, 2002
9,457
1,377
234
Ontario, Canada
Oct 22, 2007
#12
  • Oct 22, 2007
  • #12
bloopbloob said:
well you can get a brand new bbk ssi for around $700 with a tb and fuel rails....( yeah yeah i'm sure everyone's going to say its crap, but some have had good luck with it)
Click to expand...

BBK lists it for $750....and then we in Ontario have to worry about our wonderful 8% sales tax, duty and shipping to go along with it.....so tack on another $75-100 for good measure.
 

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
3
58
Port Elgin, Ontario
Oct 22, 2007
#13
  • Oct 22, 2007
  • #13
I think I am going to try and sell my 2002 GT 17" rims to buy this lol...
 

tmoss

Gettin Wired
Founding Member
Jun 28, 2001
7,153
32
128
Saint Louis, MO
Oct 22, 2007
#14
  • Oct 22, 2007
  • #14
That is a very good intake and with a little work, will make great power on heads up through 250cfm.
 

stykthyn

I want to measure mine. It doesn't look that tall.
15 Year Member
Jul 6, 2006
5,232
2,652
223
gainesville
Oct 22, 2007
#15
  • Oct 22, 2007
  • #15
I would get it, I havnt seen a tubular gt40 go for less than 400 and with the fuel rails you will be breaking even. might as well save on shipping and get all that at once.
 

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
3
58
Port Elgin, Ontario
Oct 25, 2007
#16
  • Oct 25, 2007
  • #16
so funny thing. They guy sold it to another member on the other board. the guy that bought it messaged me sayin that he lost his job the same day so he needs to sell it. he said 550 no less and he would deliver. I told him 500 and I will pick it up (only half hour away if that) he messaged me back and said the upper was getting painted right now but he thinks I have a deal for 500. SHOULD I TAKE IT.

BTW I think I changed my mind on the TF intake from my other post. This one comes with a few hundred dollars in extra stuff.
 

Gearbanger 101

Straight Outta Locash
20+ Year Stangneter
Aug 10, 2002
9,457
1,377
234
Ontario, Canada
Oct 25, 2007
#17
  • Oct 25, 2007
  • #17
If it still comes with everything from your original pics above, go for it. It was a good buy at $600.....it sounds like an even better buy now at $500.

If he hasn't painted it yet though, I'd tell him not to bother. Painting an intake is cheap and something you could do yourself for about $12. But if you really wanted to get creative, you could spend some time polishing it. Something that would take extra long if you now have to strip someone elses old, cruddy, quick paint job that they only did in order to pretty it up for a sale off of it.
 

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
3
58
Port Elgin, Ontario
Oct 26, 2007
#18
  • Oct 26, 2007
  • #18
yea I will tell him not to bither. But it sounded like he took it to a paint shop to get it painted. Who knows maby it will look awsome when it's done. if not I will strip it and powder coat it or polish it.....or maby both.


Gearbanger I talked to your buddy
 

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
3
58
Port Elgin, Ontario
Oct 26, 2007
#19
  • Oct 26, 2007
  • #19
I think I have decided to take it.
 

5spd GT

"the 5.0 owns all"
Founding Member
Aug 7, 2002
9,516
6
99
Arkansas
Oct 26, 2007
#20
  • Oct 26, 2007
  • #20
For $500, yeah I would take it, but any higher and I would have to pass

Porting will make it nicer for sure, so the money you saved from the original price, you can have it ported to match the heads of your choice at a later date.

You need some pretty hefty power to actually need the higher flow fuel rails, and it did not appear that it will happen for quite a few years.
 
  • 1
  • 2
  • 3
Next
1 of 3 Next Last
You must log in or register to reply here.

Similar threads

6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
4
Views
1K
1965 - 1973 Classic Mustangs -General/Talk- Jun 20, 2026
gray owl
G
5
Hello Everyone !
  • 5150K
  • Jul 3, 2026
  • The Welcome Wagon
Replies
0
Views
129
The Welcome Wagon Jul 3, 2026
5150K
5
Help! Intake Manifold Gasket or Head Gasket?
  • foxbodyclark
  • Oct 4, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 4, 2026
95 Laser GT Ver
Progress Thread Giving an abandoned 88 GT project a new chance at life
  • jaketractor
  • Jan 9, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
27
Views
2K
Fox 5.0 Mustang Tech Jul 20, 2025
Noobz347
P
Fox Opinions Wanted- at a crossroad with my '88 GT
  • pindude80
  • Apr 18, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
32
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 22, 2025
pindude80
P
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?