Need Suggestions Please?

I just put a pro-m mass air & 30lber's in & bbk 75tb & EGR plate w delete,,I have a crane Interceptor II piggyback,,,I got ideas but what would be a good base set up,,,fuel & timing,,im running 10psi boost with the KB 1.5 maybe 9.5,,but anyway,,,stock cam,ported stock heads,,ported lower intake ,,any questions about set up i have just ask please,,I need suggestions to optimize my knowledge to optimize my tune!!!!! thanks

p.s. I have mallory hifyre ignition,,8mm wires,,autolite 23 plugs,,,MAC shortys & H-pipe w 3inch exhaust. Uhhh,,Kenne Bell Boost a pump also
 
thats quite a set up to not have a quality dyno tune. i thing the safest thing would be to get a tweecer or a dyno tune.

you cant really do too much to tune a car like that besides twist the dizzy and increase or decrease fuel pressure.... both of which are done globally.

with boost like that i would run 19 -20 * btdc at WOT..... but you would be retarding the part throttle driving dramatically meaning your car will run hotter. you will most likely be getting worse MPG like that too.

your car is about at 25*btdc at WOT..... i would not want to retard my spark 5* accross the board.:notnice:

hows your AFR doing with a boost a pump and your 30lbers??? a bit rich probably

just thoughs

eric