• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Need to bypass heater core, any suggestions

  • Thread starter Thread starter Andres2882
  • Start date Start date May 26, 2004
A

Andres2882

New Member
Jan 29, 2004
316
0
0
May 26, 2004
#1
  • May 26, 2004
  • #1
I have a leak in my heater core inside my car resulting in antifreeze dripping into the passenger side leg area. I'd like to just bypass this problem for a bit since I don't ever use the heat down here in Florida. Anyone know who sells the tubing that will allow me to reroute the coolant flow back into the EGR instead of into the firewall/heater core? Thanks for any help.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
May 27, 2004
#2
  • May 27, 2004
  • #2
i just normally have gotten a little section of tube to connect the two heater lines (before they go into the pass compartment). the 'Help' section of parts stores sell them or you can get some metal line from the home store, if you measure the ID of the lines.

good luck.
 

DirtyD916

Active Member
May 25, 2003
804
1
38
Norcal 916
May 27, 2004
#3
  • May 27, 2004
  • #3
haah this happened to my friend in his bmw. we just went under the hood found the tubes that went to the heater core and back. We then went to home depot and got a copper spacer and just put the two tubes together. Seeing as most of his coolant had already spilled on his carpet we didnt worry about the leftovers. However you must wash your carpet very carefully as the coolant will eat threw it quickly.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
May 27, 2004
#4
  • May 27, 2004
  • #4
Check out Home Depot's plastic tubing section. They should have a 5/8" to 3/4" hose splice and some hose clamps that will work just fine. I got some copper tubing and a couple of elbows and made my own for the Explorer manifold I am using.
 
M

mi2fast

New Member
Apr 14, 2004
36
0
0
Hellcentro Ca
Jun 5, 2004
#5
  • Jun 5, 2004
  • #5
just buy a 6 inch piece of hose from the auto parts store and route the two hardlines back to each other before the firewall, 25 cent fix.
 

5.0_Gil_89

Founding Member
Oct 13, 2001
163
0
16
Germany
Jun 6, 2004
#6
  • Jun 6, 2004
  • #6
I thought the weep hole through the firewall would stop that?
 
You must log in or register to reply here.

Similar threads

D
Engine Coolant and Radio Issues
  • Don7Up
  • Sep 14, 2025
  • Fox 5.0 Mustang Tech
Replies
17
Views
623
Fox 5.0 Mustang Tech Oct 4, 2025
Don7Up
D
M
2001 evap/heater core questions
  • mnky99
  • Sep 3, 2025
  • SN95 V6 Mustang Tech
Replies
3
Views
315
SN95 V6 Mustang Tech Sep 3, 2025
mnky99
M
M
Progress Thread mnky99 2001 V6 evap core, ac compressor, heater core replacement
  • mnky99
  • Sep 5, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
507
1996 - 2004 SN95 Mustang -General/Talk- Sep 5, 2025
mnky99
M
M
2001 v6 heater return pipe leak question
  • mnky99
  • Nov 11, 2025
  • SN95 V6 Mustang Tech
Replies
1
Views
251
SN95 V6 Mustang Tech Nov 11, 2025
mnky99
M
Engine 66 heater box hoses to 5.0 heater hard tubes
  • b_arrington
  • Jan 22, 2024
  • Fox 5.0 Mustang Tech
  • 2
Replies
28
Views
4K
Fox 5.0 Mustang Tech Jan 24, 2024
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?