Need to replace my timing cover gasket...any gasket recommendations? Tips or tricks for the install?

killer5.0 · Apr 20, 2018

Was figuring that...itll be slower but i may just try one of my drills

killer5.0 · Apr 23, 2018

I see a spot around one of the cooling ports on my waterpump...between the waterpump backing plate and the waterpump housing where the gasket has a little gap...and when i squeeze it i see coolant come out which leads to me to believe it might not seal right when i bolt it back up...should i replace that gasket?

Adieu · Apr 23, 2018

killer5.0 said:
I see a spot around one of the cooling ports on my waterpump...between the waterpump backing plate and the waterpump housing where the gasket has a little gap...and when i squeeze it i see coolant come out which leads to me to believe it might not seal right when i bolt it back up...should i replace that gasket?

Yes.

killer5.0 · Apr 23, 2018

Just ordered up a new one...thanks

killer5.0 · Apr 28, 2018

Im following @jrichker directions...Is permatex ultra black adequate or do i need to buy the "right stuff"? I hate to have to buy a whole can for a few dabs...no matter how ive tried to store the rest good it always hardens in the can. Btw i bought those roloc 3m white rubber discs and slapped them in my drill to just clean up the surfaces...worked great.

General karthief · Apr 28, 2018

I've used black before, works fine.

killer5.0 · Apr 29, 2018

Last question...when do u guys change your harmonic balancer? I see a few small cracks in the rubber on mine but it looks to be intact and not hanging out etc. 93 with 75kmi on it?

jrichker · Apr 29, 2018

killer5.0 said:
Last question...when do u guys change your harmonic balancer? I see a few small cracks in the rubber on mine but it looks to be intact and not hanging out etc. 93 with 75kmi on it?

Now is the time to change it - you have the old balancer off so half the work is already done...

killer5.0 · Apr 29, 2018

Any recommendations on which one? I see about a dozen choices.

General karthief · Apr 29, 2018

Forget, what you running?
really stock is good, your not pushing a bunch of hp

killer5.0 · Apr 29, 2018

Vortech...stock bottom end...500rwhp.

General karthief · Apr 29, 2018

Well your not twisting it up over 6500 so I think you'd be fine with a stock balancer, lets fone a friend: @a91what

a91what · Apr 29, 2018

I would purchase an sfi balancer. This is not something you want to cheap out on

killer5.0 · Apr 30, 2018

Any recommedation on which one/brand? I know 0 about these lol. I want to build a dart in the near future (fordstrokers) and ill go with an innovators west piece at that time most likely. Thanks

killer5.0 · Apr 30, 2018

My limiter is set at 6200rpm if that matters...i try to keep it under 6000 bc of the stock block.

General karthief · Apr 30, 2018

Check ford dealer for stock balancer or rock auto,
5% Discount Code: 13F72553BEB8EC
Expires: July 16, 2018

Please enter this code in the ‘How Did You Hear about Us’ box to receive the discount. Please enter ONLY the discount code, no other words or numbers. Please note that orders using discount codes must be placed online and the discount code must be entered before an order is submitted to receive the discount.
look for a ford part number for stock replacement.

killer5.0 · May 1, 2018

Awesome thanks

killer5.0 · May 1, 2018

This is the one i had on the car...doesnt actually look that bad...thoughts?

General karthief · May 1, 2018

Does not look bad from the pic but I would replace it anyway, I don't believe they are expensive

killer5.0 · May 1, 2018

Ok...i see on rockauto some oe replacements for under $40? LMR sells a fordracing one for 75...and the performance ones are well over 100. Ill probably go with the fordracing one since it seems middle of the road and had good reviews

Need to replace my timing cover gasket...any gasket recommendations? Tips or tricks for the install?

killer5.0

killer5.0

Attachments

Adieu

Easy there, this ain't a dating site.

killer5.0

killer5.0

General karthief

wonder how much it would cost to ship you a pair

killer5.0

jrichker

StangNet's favorite TOOL

killer5.0

General karthief

wonder how much it would cost to ship you a pair

killer5.0

General karthief

wonder how much it would cost to ship you a pair

a91what

SendMeUrDataLog

killer5.0

killer5.0

General karthief

wonder how much it would cost to ship you a pair

killer5.0

killer5.0

General karthief

wonder how much it would cost to ship you a pair

killer5.0

Similar threads

Need to replace my timing cover gasket...any gasket recommendations? Tips or tricks for the install?

Attachments

Easy there, this ain't a dating site.

wonder how much it would cost to ship you a pair

StangNet's favorite TOOL

wonder how much it would cost to ship you a pair

wonder how much it would cost to ship you a pair

SendMeUrDataLog

wonder how much it would cost to ship you a pair

wonder how much it would cost to ship you a pair

Similar threads

Privacy & Transparency

Privacy & Transparency