• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-

NEED YOUR ADVICE! Please.

  • Thread starter Thread starter raw23062
  • Start date Start date Sep 21, 2010
R

raw23062

New Member
Sep 21, 2010
4
0
0
Sep 21, 2010
#1
  • Sep 21, 2010
  • #1
Hey all, thanks in advance for the help. I've been around Mustangs a long time, building and driving old cars. I've decided I'm getting older, I just put my 66 Fastback Pro Touring/Street up for sale(Its in the classifieds on here as well) and I want to buy a 99-04 Cobra or Saleen with a blower. I absolutely have to have 600+hp and a manual trans. I want the look of the Saleen and I want leather. Other than that, I know NOTHING about Mod motors and what years to stay away from, etc... I'll have about 20-23k to spend and want the most performance and bang for my buck. Alot of the supercharged cars I look at have alot in the way of fuel system upgrades. Conventional wisdom would say this is a must??? If so, what types of upgrades are a must when producing these kinds of hp numbers? Any advice on making this switch would be very helpful. Thanks again!

Randy
 

crazystang25

Member
Jan 25, 2009
492
0
16
Sep 21, 2010
#2
  • Sep 21, 2010
  • #2
03/04 cobra w/ kenne bell 2.8L.
 
0

007

Founding Member
Jan 29, 2002
3,287
24
69
Broke
Sep 21, 2010
#3
  • Sep 21, 2010
  • #3
Yup. Start with a 03/04 cobra. Forged 4v. Perfect for making silly power.
 

BurningRubber

10 Year Member
Dec 6, 2004
1,865
24
58
Sep 21, 2010
#4
  • Sep 21, 2010
  • #4
It would be a poor decision to start anywhere else but at an 03/04 Cobra. 600rwhp is a breeze, and you don't have to touch the bottom end.

On a 2v car, you'll be rebuilding the engine, porting the heads, cams, etc. It can definitely be done, but it will save A LOT of money in parts and labor, as well as time to get a Cobra to 600rwhp compared to a GT, or Saleen (which uses a supercharged 2v 4.6).
 
R

raw23062

New Member
Sep 21, 2010
4
0
0
Sep 21, 2010
#5
  • Sep 21, 2010
  • #5
Ok, so the difference in the 03-04 is the forged internals in the bottom end? Good to know. So if I buy one already worked and making 600+hp, what kind of other mods should I make sure are there? For example, I see alot with "boost a pumps" etc.... How about a little lesson there? Thanks guys, this if good info.
 

Maxpowers

Member
Sep 9, 2009
859
2
19
Pittsburgh, Pa
Sep 21, 2010
#6
  • Sep 21, 2010
  • #6
BurningRubber said:
On a 2v car, you'll be rebuilding the engine, porting the heads, cams, etc. It can definitely be done, but it will save A LOT of money in parts and labor, as well as time to get a Cobra to 600rwhp compared to a GT, or Saleen (which uses a supercharged 2v 4.6).
Click to expand...

I agree with the 03/04 Cobra. You have a much better platform to start with and will need very minor parts to get to your goals. You will still have a decent resale value compared to a 2v motor.
 
R

raw23062

New Member
Sep 21, 2010
4
0
0
Sep 22, 2010
#7
  • Sep 22, 2010
  • #7
Search officially narrowed to 03-04 Cobras! Thanks guys! Next I'll want advice on boosting HP numbers. Thanks again!
 

Maxpowers

Member
Sep 9, 2009
859
2
19
Pittsburgh, Pa
Sep 22, 2010
#8
  • Sep 22, 2010
  • #8
raw23062 said:
Search officially narrowed to 03-04 Cobras! Thanks guys! Next I'll want advice on boosting HP numbers. Thanks again!
Click to expand...

You will need to address suspension and launch related parts first, as well as Subframes.
 

BurningRubber

10 Year Member
Dec 6, 2004
1,865
24
58
Sep 22, 2010
#9
  • Sep 22, 2010
  • #9
raw23062 said:
Ok, so the difference in the 03-04 is the forged internals in the bottom end? Good to know. So if I buy one already worked and making 600+hp, what kind of other mods should I make sure are there? For example, I see alot with "boost a pumps" etc.... How about a little lesson there? Thanks guys, this if good info.
Click to expand...
\

Yes. They came with a forged crank (all 96 and up Cobras do), forged rods, and forged pistons.

As far as buying one already making that kind of power, just be careful of what you get into. There's a right, and a wrong way to get there and you never know why someone is selling.

Look for a beefed up fuel system (pump, injectors, MAF, rails), see if they have addressed the IRS (99-04 Cobras have an independent rear axle) issues which are more pronounced if the car has sticky tires and hard launches, find out how the car was tuned, who did the work, etc. Receipts are a nice thing to see when you are buying a car that has that much done to it.

Maxpowers said:
You will need to address suspension and launch related parts first, as well as Subframes.
Click to expand...

Stock suspension would be fine (shocks and struts, springs), but definitely the IRS if you're planning on running sticky tires on the car, launching it hard, or anything of that nature. Subframe connectors regardless, they help a ton. Full length weld ins are the way to go, and you'll probably find that a bit of the ones you look at already have them done.
 
You must log in or register to reply here.

Similar threads

F
Ford 460 swap
  • Ford460
  • Sep 13, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
6
Views
494
1996 - 2004 SN95 Mustang -General/Talk- Sep 14, 2026
Ford460
F
J
Wheels-Tires Need Some Help - Brakes Upgrade/Wheel fitment
  • jaygee15
  • Dec 8, 2025
  • Fox 5.0 Mustang Tech
  • 3 4 5
Replies
85
Views
4K
Fox 5.0 Mustang Tech Oct 6, 2026
jaygee15
J
S
Block questions
  • s_vargas54
  • Jan 25, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
21
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 8, 2026
Trogdor
H
Forced Induction On3 Turbo Kit- Parts list NEEDED - 302 Stock Motor
  • Hirothecool1
  • Feb 27, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
21
Views
2K
Fox 5.0 Mustang Tech Mar 7, 2026
slow84lx
S
O
Computer swap
  • Oakman
  • Jun 22, 2024
  • The Welcome Wagon
Replies
2
Views
647
The Welcome Wagon Jun 22, 2024
Oakman
O
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?