• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

New 94 5.0 build layout. Need advice!

  • Thread starter Thread starter Stingydonut
  • Start date Start date Nov 17, 2019
S

Stingydonut

New Member
Nov 17, 2019
1
0
1
New york
Nov 17, 2019
#1
  • Nov 17, 2019
  • #1
Ok so I picked up a 94 5.0 automatic vert that runs and drives well for 900 dollars with 140k miles. I've always owned mustang's and corvettes my whole life the fastest of which was my 2013 5.0... every car I get has to be faster than the next lol. Meaning I need to get this thing running mid to low 12's n/a without nitrous and must be comfortable to drive on the street and be a stock bottom end because I live in an apartment with a rented garage and dont have the roof clearance to pull the motor otherwise it would have just been a 351 swap. Yes I know... why a convertible!? Because it was 900 dollars running and driving with no mechanical issues besides brakes. I have about 5k to spend.
It currently has a cia, cobra manifold, shorty headers, xpipe, and a catback.
My mods I'm planning on doing.
-eddlebrock performer heads (any other suggestions?)
-e303 cam
-4.10 gears
-75 mm throttle body
-bigger injectors (suggestions?)
-drag radials
-b&m hammer shifter
-mds ignition
- new fuel pump (suggestions?)

I'm going to be doing all the work myself, besides maybe the gears. My budget is 5k, the toughest job I've tackled was swapping a cam on a old c3 corvette with a sbc... so I assume my mechanical skills should be good enough to get the job done with some research on the 302? I guess my main question is... will these mods take me where I want to be (keeping up with newer coyote stangs). Or am i fighting a losing battle? And before everyone freaks out... yes I'll do a compression and leak down before I buy anything lol.
 

CarMichael Angelo

my rearend will smell so minty fresh,
15 Year Member
Nov 29, 1999
10,641
8,909
234
Birmingham, al
Nov 17, 2019
#2
  • Nov 17, 2019
  • #2
I’m not freakin out.
you’re fighting a losing battle.
 
Reactions: RaggedGT

General karthief

wonder how much it would cost to ship you a pair
20+ Year Stangneter
Aug 25, 2016
27,899
10,555
203
polk county florida
Nov 17, 2019
#3
  • Nov 17, 2019
  • #3
If you plan on out running 'newer coyotes' then you better plan on using a coyote engine.
And your likelihood with a 5k budget and you working conditions are slim, it can be done but I think not with that budget.
JMO
 

90sickfox

Wasn't a pretty sight...and I've got big hands
SN Certified Technician
Mar 2, 2015
6,945
5,816
213
Nov 17, 2019
#4
  • Nov 17, 2019
  • #4
Take that 5k and put a supercharger on it with bigger injectors a camshaft from Ed Curtis and get the cobra intake ported. With the camshaft you'll need rockers, springs, and possibly push rods. You'll be close to tipping that 5k budget. Oh...dang...it'll need to be tuned...bye bye 5k.

To keep up with a stock 2019 5.0 you'll need 350hp+ at the wheels. These cars eeked out 225hp at the engine factory.

On top of the listed stuff you'll need to do something with that AOD transmission and the rear end gear. 3.73s and 4r70 with a shift kit will run another couple grand.

Then you'll need some tire and adjustable shocks and struts to dial in the traction. The new 5.0 has traction control and is set up better than a fox based car

I've got a f- u- l- l- y built 331 turbo car and would have a tough time with most newer 5.0 cars on the street. Traction being my biggest issue. Spinnin' ain't winnin'.

Now, you're going to need some subframe connectors, torque box reinforcements, and may need bushings and such. These things add safety to the car. Luckily, you have disc brakes all the way around. I'd rather be cryin' than dyin'.
 
Reactions: General karthief and RaggedGT

Wayne Waldrep

Before I post a pic, do you have one of yours?
20+ Year Stangneter
Apr 14, 2003
1,338
659
143
Cuba, AL
Nov 17, 2019
#5
  • Nov 17, 2019
  • #5
And........the battle's over.
 
Reactions: 90sickfox
A

alwil

New Member
Sep 23, 2019
1
0
1
Moose Jaw , canada
Nov 24, 2019
#6
  • Nov 24, 2019
  • #6
Or do the stuff you want to do and add nos
 
You must log in or register to reply here.

Similar threads

new :poo: box, may need to hit you guys up for 79-82 info when i fix thIs turd.
  • rednotch
  • Sep 27, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3
Replies
40
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 4, 2026
Noobz347
P
High idle issue and leaking after running.
  • PHoffman
  • Dec 24, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
1
Views
463
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Dec 24, 2024
General karthief
W
Help with 95 GT
  • waynewl34
  • Apr 5, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
1
Views
290
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 5, 2025
Noobz347
A
Fox Planning on building my foxbody and was wondering if I can get any tips or anything to watch out for!
  • Angelq1028
  • Oct 31, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3 4
Replies
76
Views
5K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 29, 2025
Robman8028
R
T
Nitrous on 95 5.0 Tips?
  • tyler6368
  • Jun 21, 2023
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
5
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 25, 2023
revhead347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?