new cam idle?

carbed 85 gt

New Member
Mar 20, 2003
121
0
0
Honolulu HI
Well I just installed the trickflow track heat kit from summit, the idle is surging a bit but is getting better by the day. But somtimes the idle dosent catch itself after a blip of the throttle or when cold. Should this be gettiing much better after a while? Also if i disconeect the battery to clear a code will it "unlearn" :p the cam?
 
I have the trickflow cam too. Everytime you unplug the battery im pretty sure the ECU will need to relearn everything again.

My idle is between 650 and 900. when i first started it up it would surge really bad until i cleaned my IAC and set the TPS.

Set your TPS to .96 and make sure you have no vacuum leaks. TFS1 cams have a sexy idle.
 
I also have the same kit and love it good choice. My car idles about 900 you need to adjust the idle set screw under the throttle body then set the TPS and check for all vaccum leaks. You did break in the cam correct? Great choice on the parts nothing better the Trick Flow. :nice:


carbed 85 gt said:
So check the TPS at, what should my idle be set at and should it be set without the IAC connected?