T45 on a 4.6 is a pain in the rear!! Nowhere near as easy as 5.0 w/T5... and WTF is up with the new third, secret bolt on the starter!?!? Took myself, and a friend to get that one bolt out using a 1 1/2' extension, swivel, 2" extension and another swivel.... Thats crap!
I also replaced the main e-brake cable, and the front wheel-bearing hubs Sunday, on the same day as the clutch install, and both of those tasks took me literally 30 minutes combined....but the clutch took the rest of the entire day(including 3 hours it took to get the flywheel turned), but still! Give me a break! I also see that a simple Header swap is going to be not so simple either...guess I'll wait to change those when I get the tube k-member, new mounts, and an o/r h-pipe...might as well forge the bottom end while I'm at it!
I also replaced the main e-brake cable, and the front wheel-bearing hubs Sunday, on the same day as the clutch install, and both of those tasks took me literally 30 minutes combined....but the clutch took the rest of the entire day(including 3 hours it took to get the flywheel turned), but still! Give me a break! I also see that a simple Header swap is going to be not so simple either...guess I'll wait to change those when I get the tube k-member, new mounts, and an o/r h-pipe...might as well forge the bottom end while I'm at it!