New guy here from SE Pa

Hey all, new member , Bill , here from South Eastern Pa. Been lurking here for a while. Finally decided I should join Lol
I own an 86 Mustang Gt convertible. Bought it as a roller in 2010, took me little over a year to get it back on the road Been constantly evolving ever since. This one has been deemed a keeper. Owned a lot of hot rods over the years but this car checks all the boxes and has become part of the family.
Some details : Engine is a .030 over 302 for 306 cubes,XX block, all forged internals, 9.25:1 compression, FMS iron heads with chevy valves ported and polished, E303 cam advanced 4 degrees, Holley Systemax intake port matched, 42 lb hr injectors, 75mm t-body, Kirban adjustable regulator, converted to 89 A9S pcm and 80mm MAF, Powerdyne supercharger pulley’d for 8-9 psi, UPR power pipe, Astro T5 trans, Spec stage 2 clutch , BBK shorty headers and off road H pipe, MAC 3 inch pro dumps, 8.8 with FMS posi and 4.11 gears, Anderson Motorsport PMS series 4 tuning it, Cervinis cowl hood, converted to 95 Mustang 5 lug front brakes and 5 lug axles and ranger drums in back, Hurst shifter, Monster tach with shift light, boost gauge , AEM wideband ,Anthracite Bullits with 235/40s up front and 275/40s in the back. I know there is more I am forgetting.
plans for this year, install my sub frame connectors, convert to 3G alternator and go with Megasquirt ( probably Microsquirt due to limited funds ) Hoping to learn more about tuning here.
 

Attachments

  • F60576AA-0771-4EBC-BB78-3560037DA404.jpeg
    F60576AA-0771-4EBC-BB78-3560037DA404.jpeg
    211.4 KB · Views: 83
  • 8E2F1F46-F84C-4A5E-B038-BDA05E69E11F.jpeg
    8E2F1F46-F84C-4A5E-B038-BDA05E69E11F.jpeg
    291.6 KB · Views: 77
  • E18C44D7-18DB-4169-B204-66865B146B3A.jpeg
    E18C44D7-18DB-4169-B204-66865B146B3A.jpeg
    381.4 KB · Views: 81
  • 454A0D0F-7851-4A42-B670-6380B3006179.jpeg
    454A0D0F-7851-4A42-B670-6380B3006179.jpeg
    381.4 KB · Views: 74
  • 485C10A7-725C-4505-9B47-45F2436E5C1F.jpeg
    485C10A7-725C-4505-9B47-45F2436E5C1F.jpeg
    180.8 KB · Views: 77
  • Winner
Reactions: 1 user
  • Sponsors (?)


Pete, it made 412 hp and 377 ft lbs on my old intake set up. Hadn’t been back to dyno with this intake but don’t expect a huge gain. It has run a best of 12.24 at 116 with me snoozing at the tree and spinning tires badly. It’s just a very fun street car.
 
  • Like
Reactions: 1 user