New Here

[Chucks98]

Hi Im new to this forum and Mustangs in general. I had a couple questions.
First off I have a 98 GT with 57k miles that is 100% percent stock, crappy paper air filter, cats, etc. My first trip to the track resulted in a best run of [email protected] with a 2.0598 60ft. It was my fastest of four runs. I was wondering if my mph seems low to anyone else? All four runs my trap speeds were consitent low-mid 91s.
Second question is it possible to put down 300-325 @ the wheels while staying N/A?
Thanks in advance

 

[98COBRA281]

nice to see another 98 to put down 300-325 you will need, P&P pi heads, good cams, and intake,and maybe some long tubes and a tune....... but its possible

 

[crzyhrse99]

Times seem about right for NPI stang. You will probably need every bolt on including aftermarket cams, LT's, PI swap to get 300rwhp. Oh and welcome to :SNSign:

 

[Chucks98]

Cool so it is possible. Ill try to get some pics but they gonna have to be off my phone. My digital cam is getting the lens fixed at the moment. Never let a 5yo get a hold of ur camera.
Thanks

 

[FoxRod87]

Times are about right and yes you will need every bolt on and ported PI heads and cams to get 300hp. Same as said above.

 

[BEASTang96]

i made 2 passes yesterday in my 96 gt before finding a crack in my intake, my only hard pass yeilded a 16.00 at 88mph. wheelspin was a big problem. were u running a 5 speed or on auto?

 

[rabidscoobie]

Welcome to :SNSign: