new parts!

98COBRA281 · Feb 6, 2010

MHS stage 3.5 npi cams

trick flow adjustable crank gears

and MHS matched cams gears

just got it running last night, they sound great at idle, and pull really hard after 3500ish, i havent revved it past 6000 rpms yet because of the tune, but when its tune it should be revving to about 7000, the cam specs are: duration at .050 238/240, lift 550/525, LSA 109

Shiroelex · Feb 6, 2010

Niiice. We need a video!

Tim2002GT · Feb 6, 2010

Sweet! What all do you have done to your fuel system again? I know you said you were running a little lean up top before the cams. Any changes?

1fun281 · Feb 6, 2010

They only took one month of waiting and a whole friday night of work
They sound sick at an idle though...

Mr. Rustypwnz · Feb 6, 2010

nice!! whatcha doin with the other cams? lol hint hint...

98COBRA281 · Feb 6, 2010

Tim2002GT said:
Sweet! What all do you have done to your fuel system again? I know you said you were running a little lean up top before the cams. Any changes?

walbo 225, 30lb injector, 9/16 fuel rails, i think it was the fuel filter tho, i was having a starting problem when the engine was hot, i would have to cycle the key a few time to build fuel pressure, i changed the filter and it went away

Mr. Rustypwnz said:
nice!! whatcha doin with the other cams? lol hint hint...

haha... sorry, but me and ryan(1fun281) are going to trade some parts, hes getting the cams, and im getting 99 GT rims and tires for my DD tacoma...lol they look cool on it.

westgastang5.0Coyote · Feb 6, 2010

Can't wait to see the video.

Rickyll7 · Feb 6, 2010

who is MHS?

found it... http://www.modularheadshop.com/Cams.htm

Looks like an awesome company!

ninjastang125 · Feb 6, 2010

What is a guy with a 99 gt do with npi cams?

Mr. Rustypwnz · Feb 6, 2010

he had pi cams in it, like 230/230 .540/.540 pi cams will work in npi heads with some mods.. other way around too..

Mustang92 · Feb 6, 2010

Rickyll7 said:
who is MHS?

found it... ModularHeadShop Bullet Cams

Looks like an awesome company!

Yep they do great work. They did the head work on my 04 Mach 1 heads and couldn't be happier.

Bill

98COBRA281 · Feb 6, 2010

ninjastang125 said:
What is a guy with a 99 gt do with npi cams?

yeah i had pi cams in it, 225/230 dur @ .50, 540/540 lift, and 112 lsa

nickmckinney · Feb 8, 2010

1fun281 said:
They only took one month of waiting and a whole friday night of work
They sound sick at an idle though...

They had to wait on me testing them in a few motors to really believe the install centerlines were ground off as far as they were I seem to remember one of the cams was like 6 degrees out.

nickmckinney · Feb 8, 2010

98COBRA281 said:
...and pull really hard after 3500ish...

How much low and midrange did you lose (if any) compared to the older cam spec? I am cooking up a set of race cams for a NPI race motor, the intake spec is such that it will probably not work with a PI head even with a piston notch.........

98COBRA281 · Feb 8, 2010

nickmckinney said:
How much low and midrange did you lose (if any) compared to the older cam spec? I am cooking up a set of race cams for a NPI race motor, the intake spec is such that it will probably not work with a PI head even with a piston notch.........

honeslty, it gained a ton of mid range tq compared to the old cams, they were not degreed, so who know how much they were out, but it feels great in the 2000-3000rpm range!, i cant wait to rev this past 6200(that where my limiter is set at now) i just need the 6061 plenium, and retuned!

1low03gt · Feb 8, 2010

Dude,that is awesome!!Your stang is evil as it is!It's gonna be down right dirty now! Gonna be a happy Rev'er!

Kornnut · Feb 8, 2010

We demand video now.

nickmckinney · Feb 9, 2010

98COBRA281 said:
honeslty, it gained a ton of mid range tq compared to the old cams, they were not degreed, so who know how much they were out, but it feels great in the 2000-3000rpm range!, i cant wait to rev this past 6200(that where my limiter is set at now) i just need the 6061 plenium, and retuned!

Thats confirming what I have been seeing, get the LSA down and advance the intake lobe as far as possible. (For those that don't understand this is how you can go a whopping 13 degrees bigger on the cam size and actually gain midrange torque)

98COBRA281 · Feb 9, 2010

thanks guys, ill get a video, but its pouring rain out side, so i dont want to pull her out of the garadge...lol

yeah nick, it feels amazing, i took my friend (1fun281) for a ride, and the first thing he said was how good it feeles in low-midrange rpm compared to before

1fun281 · Feb 9, 2010

nickmckinney said:
They had to wait on me testing them in a few motors to really believe the install centerlines were ground off as far as they were I seem to remember one of the cams was like 6 degrees out.

I know, i was just messing with 98cobra281, didnt mean to sound like i was putting you down. We just waited like everyday hoping they were coming to put them in.

new parts!

98COBRA281

Shiroelex

There's nothing worse than aut

Tim2002GT

1fun281

Member

Mr. Rustypwnz

Advanced Member

98COBRA281

westgastang5.0Coyote

Rickyll7

Member

ninjastang125

New Member

Mr. Rustypwnz

Advanced Member

Mustang92

SN's #1 1%er

98COBRA281

nickmckinney

Member

nickmckinney

Member

98COBRA281

1low03gt

Kornnut

nickmckinney

Member

98COBRA281

1fun281

Member

Similar threads

new parts!

There's nothing worse than aut

Member

Advanced Member

Member

New Member

Advanced Member

SN's #1 1%er

Member

Member

Member

Member

Similar threads

Privacy & Transparency

Privacy & Transparency