New Pinging problem

GTOreturns

Well-Known Member
Oct 1, 2003
51
17
59
West Coast Best Coast
I just changed my plugs wires , cap , and rotor. The old plugs that came out had a gap of 074 :D I also took out the screamin demon coil and put the stock coil back in. Now going up hills in 3rd gear it pings like a biotch! WTF? :shrug: The fuel system is stock except for a AFPR.
 
i had a lot of trouble setting my timing before... but i got a lot of help from :SNSign:
if u have a light, i'd check it real quick to make sure its still at 12*. easy to eliminate 1 cause of pinging
also, is your rotor pointing to #1 plug wire on your cap when you are at TDC of the compression stroke?
- i'm no help if its coil related... no experience there
 
i had a lot of trouble setting my timing before... but i got a lot of help from :SNSign:
if u have a light, i'd check it real quick to make sure its still at 12*. easy to eliminate 1 cause of pinging
also, is your rotor pointing to #1 plug wire on your cap when you are at TDC of the compression stroke?
- i'm no help if its coil related... no experience there

I KNOW thats not the problem. First Im changing coils again to see if that helps.
 
Can you see FP while under demand? You might have a volume issue.

Also, does the pinging change if you stand on it more or less (on a given, same hill)? Or does it change if you tach it out in a higher gear?

Good luck.