• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

New radiator questions!

  • Thread starter Thread starter WilwoodFiveO
  • Start date Start date May 22, 2006
W

WilwoodFiveO

Member
Oct 20, 2005
108
0
16
VA
May 22, 2006
#1
  • May 22, 2006
  • #1
Hey guys i have been looking at radiators for some time now and have come to the conclusion that i wanna save up for this. do you think it would be a good buy? http://store.summitracing.com/partdetail.asp?autofilter=1&part=BCI%2D81165&N=4294908331+4294908282+4294924761+4294924500+4294839040+400001+115&autoview=sku

also would this do a really good job at cooling everything? i have heard only good stuff about Be Cool so i looked to see what they have and that seemed to hit it right on the nose. also if you think this is to much do you can you please list what you would do? thanks

thanks for all your help.
 

90mustangGT

I felt sorry for girls because
Founding Member
Jan 15, 2002
2,773
17
89
Dallas, GA
May 22, 2006
#2
  • May 22, 2006
  • #2
That's a little pricy. You could do the same much cheaper. Get a 31x19" all alumimum unit, and a aftermarket fan of some kind, will do the same thing but with only a fraction of the cost.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
May 22, 2006
#3
  • May 22, 2006
  • #3
I have to agree with Jason. If you have cash and want top notch components, the all alum radiator, along with one of Baskin's fan and controller kits would be a sweet set-up (I'd use his controller no matter what fan you choose. Mark VIII and Viper fans move a ton of air, if needed).

Good luck.
 
W

WilwoodFiveO

Member
Oct 20, 2005
108
0
16
VA
May 30, 2006
#4
  • May 30, 2006
  • #4
ok i took your guys advice and have also read a little more into this but still have a few questions?

1.) If i get an aftermarket aluminum radiator like this http://store.summitracing.com/partdetail.asp?autofilter=1&part=SUM%2D380451&N=400304+4294908331+4294924761+4294908282+4294840126+4294924500+4294839040+115&autoview=sku will i need a fan? will i need to order a new coolant tank and stuff like that? please help im only 16 and don't understand this stuff that much. your help is greatly appreciated.
2.) if yes to the one above should i get an electric fan or stick with stock?
3.) if i should go with electric, i need a new alternator, right? if so i am getting one anyways because im redoing my sound system? what Alternator should i get?

Thanks your help is very needed and im trying to order this by tonight too

- Cody -
 

ras50gt

Member
Oct 25, 2005
200
2
19
May 30, 2006
#5
  • May 30, 2006
  • #5
I have copied this into a few other radiator threads...it should help

I went with the aluminum summit one. I would recommend the summit or griffin. I bought the summit 31" L X 19" H: part number SUM-380431. I couldn't be happier with how well it keeps temps low especially compared to the stock one. The only issue I had was the fitment, it fits in there tight (had to bend some metal lines on the passenger side but nothing serious) and because its almost 3 inches wide, the fan shroud (assuming you still have the stock one) will move closer to the fan belt. I ended up cutting the stock shroud when I had to get to the belt tensioner. So, I would recommend going one size smaller, summit makes a 27 3/8" L X 19" H part number SUM-380428. I think this may have made the install a lot easier. The other issue you will have is connecting the hoses. The inlet and outlet of the summit ones are bigger than the stock ones; I used some Vaseline to help get them on. I also cut about two inches off the bottom hose; u will notice that the hose will bend slightly due to the bottom inlet slanting up-word as well as the radiator being wider than the stock one. You will need to get a fitting to go into the radiator neck that connects to the overflow tank hose. I got this from pep boys. Also, you will have to drill holes for the shroud to hook up at the top, I used the stock shroud screws. Then drilled holes for the shroud at the bottom of the radiator; I used zip ties to hold it together at the bottom. The only other suggestion I have is to consider installing an electric fan while doing the new radiator; if you do it later, it will mean more work later on. The only thing is without the stock fan shroud, you will have to figure out a way to mount the stock over flow tank or buy an aftermarket one and mount that some how. Also, there is no drain plug on the radiator, I decided I wasnt going to spend another 100+ for a more expensive radiator with one. I don't think the griffin or jegs have them either.


Another thing to think about when deciding on the summit or griffin, is to look at the construction. The summit is fully welded while the griffin uses an epoxy seal. Most people I talked to told me to get a welded radiator. I did a little research on epoxy ones, but i'm still not too sure how they compare. During my install, I first thought I should have spent the extra money on an actual direct fit mustang radiator, but as soon as it was in I was glad I went with the summit one. Plus I was going to buy an electric fan with the money I saved but never got to it.


I know this was long, but you should have no problems with your install and it should save you some money, which is always good. Like most things, its better to do it right the first time. I learned a lot from my experience and I hope all this helps.
 
W

WilwoodFiveO

Member
Oct 20, 2005
108
0
16
VA
May 30, 2006
#6
  • May 30, 2006
  • #6
ok ras50gt i just realized that the one listed above is for an auto. i really need a new radiator and fan my car over heated today in litterally 15 minutes of city driving 87 degrees outside and all i have is Mac long tubes, Mac on road h-pipe, and magnaflow catback.

anybody think that this is a good one http://store.summitracing.com/partdetail.asp?autofilter=1&part=GRN%2DGMAR7993MT&N=4294908331+4294908282+4294924761+4294924500+4294839040+4294840126+115&autoview=sku its seems to be a good price and looks like a good product

i would also like to be able to use this fan http://store.summitracing.com/partdetail.asp?autofilter=1&part=PRO%2D67015&N=4294908331+4294908282+4294924761+4294924500+4294839058+115&autoview=sku

If you think that this combo would work to keep a stock 302 with full exhaust cool please tell me. also im not really sure if this fan would work with the radiator above so please tell me which one would if that one doesn't. Also i am going to be running new speakers and a new head unit ( the speakers include all new door front and back speakers and a 12" sub in the back with an amp. my igniton is going to be updated soon too. so now that question is which alternator should i get? if none listed below are good enough please link one for me thanks

** option 1 alternator http://www.latemodelrestoration.com/iwwida.pvx?;item?item_no=PA-1619M6B1%20%20%20%201&comp=LRS
** option 2 alternator
http://store.summitracing.com/partdetail.asp?autofilter=1&part=PWM%2D47759&N=4294908331+4294908282+4294924761+4294925143+4294880793+4294880691+4294908395+115&autoview=sku
** option 3 alternator
http://www.latemodelrestoration.com/iwwida.pvx?;item?item_no=PA-16196B1%20%20%20%20%201&comp=LRS
 

feifong

New Member
Apr 4, 2005
319
0
0
mesa
May 30, 2006
#7
  • May 30, 2006
  • #7
youre still paying too much to cool a stock 302 You can go with real brand name if youre paying that much.
 
W

WilwoodFiveO

Member
Oct 20, 2005
108
0
16
VA
May 30, 2006
#8
  • May 30, 2006
  • #8
well im going to be getting a 351 in july so im preparing for everything i can right now.and this is going to be cooling it in some very high temps so its not like im worried. also money isn't much of a problem me and my bro are bulding this car together and each get 900$ pay checks every other week and we like to do mostly the best we can get at the time we can.
 
You must log in or register to reply here.

Similar threads

Flushing water from the radiator and block.
  • djj62478
  • Oct 7, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
271
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 11, 2026
CAMTWO1070
D
For Sale 1993 Mustang LX for parts or restore
  • diesel farmer
  • Oct 6, 2026
  • Fox Body Mustangs For Sale (1979-93)
Replies
0
Views
420
Fox Body Mustangs For Sale (1979-93) Oct 6, 2026
diesel farmer
D
Cooling Jacket Pitting Idea's?
  • BoostedRed89gt
  • Aug 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
12
Views
363
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 17, 2026
Mustang5L5
Exhaust April is the worst month
  • Enzio
  • Mar 4, 2026
  • 1974 - 1978 Mustang II Talk & Tech
Replies
5
Views
355
1974 - 1978 Mustang II Talk & Tech Mar 7, 2026
LILCBRA
F
Fox 1990 Mustang GT 5.0 A9L – Engine suddenly shuts off but immediately restarts when key turned
  • FishermansFriend
  • Aug 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
16
Views
695
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 30, 2026
General karthief
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?