New Supercharger

9

93Notch/03Mach1

New Member

Jan 14, 2008

5

0

0

sarasota

Feb 21, 2008

#1

• Feb 21, 2008

• #1

I have an 03 Mach 1 and i'm want to put an 03 cobra factory Eaton on it. Does anyone what the exact differences are between these cars as far as small things that will need to be added(check valves, bypass valves, etc.) I know that the internals are not forged, so i was also wondering what a safe amount of boost would be to run in it. Any info will be greatly apreciated

 

SVT98Snake

New Member

Apr 15, 2005

258

0

0

OK, USA

Feb 23, 2008

#2

• Feb 23, 2008

• #2

do you have the new setup for the additional belt?

also, try searching....this has been discussed.

8-10 psi is about max.

puttina a heaton it is a waste of money. You should look at the KB kit...you can put more boost safely and make a buttload more power...

 

U

Uncle Meat

Banned

Jun 13, 2002

0

1

0

Prattville, Alabama

Feb 23, 2008

#3

• Feb 23, 2008

• #3

It's been discussed plenty. Bottom line is if you don't have a COMPLETE donor 03/04 Cobra to pull the MANY parts from you'll end up spending more than just going out and buying a brand new kit specifically designed for your application.

U.M.

 

9

93Notch/03Mach1

New Member

Jan 14, 2008

5

0

0

sarasota

Feb 25, 2008

#4

• Feb 25, 2008

• #4

Yea the more i ask about it, the worse it looks. I'll have to look for something more practical. Thanks for the help