I have a 1984 mustang turbo. Want to get some power out of it but have no clue where to start. Have read that you can run 400+ hp with mainly stock internals. So my main wonder is what parts and mods do I exactly need to do. Along with where to get the parts. Many thanks.
Welcome aboard. Use the search function to find more info. You can make some real power with a 2.3 turbo. I'm sure there are a lot of guys here that can help you toward your goals.
thanks for the site looks like good place to start for the intercooler, exhaust and blow-off. Next question is for 20+ pounds of boost what turbo and will i have to trick the m.a.f. Just want all info i can get cause I have been around v-8 engines growing up. was a mechanic on automotive and heavy equipment but still have no clue when it comes to pumping up a 4 cyl turbo. again thanks
I know im asking dumb questions but like it says new to 4 cyl especially with turbos but where can i find factory wiring harnesses. Along with the question thats been bouncing in my head should i talk to esslinger about a stroker kit and a head if i want 400hp out of a street car? Or go with bolt on parts want somewhat chesp but to be reliable.
Check turboford.org for wiring harnesses. I think right on the home page there is a link to a site that deals specifically with them, aside from getting one from a member.
It's on the techboard page - http://www.thedetailzone.com/ford replacement harnesses.htm
Check out boport.com for your cam he knows his stuff. You'll have a SD setup instead of maf. Either way at 400hp you'll probably be looking at a stand alone setup like a PIMP or mega squirt and scrapping the speed density stuff.
You can start out with simple mods for a nice boost in power....Gillis valve (manual boost valve), 3" downpipe and full exhaust, and a better intake in front of the turbo (or at least a cone filter). Beyond that you're getting more involved, depends on how much you wanna spend.