Next...project stiffin up

JD1964 · Mar 18, 2018

The 93 vert is sloppy in the front. I mean frame flex when putting along bumpy parts in roads. It’s currently missing the cross braces and the bumper reinforcement. I hope after I install these missing parts it will stiffin up. It’s also mouthed drivers side fender skirt. That’s getting installed too.

Mustang5L5 · Mar 18, 2018

Do you already have SFCs?

JD1964 · Mar 18, 2018

Mustang5L5 said:
Do you already have SFCs?

There are SFC but not full length. Basically they run from the tq box area to about 1/2 way forward

JD1964 · Jun 11, 2018

I finally got the factory x bracing and front bumper support installed. Big improvement in the sloppy steering column feel. Still not as stiff as my LX hatch but much better now!

BlakeusMaximus · Jun 11, 2018

I don’t think the bumper reinforcement will do any stiffening. That just bolts to the radiator support, that’s what holds the front end together.

JD1964 · Jun 11, 2018

BlakeusMaximus said:
I don’t think the bumper reinforcement will do any stiffening. That just bolts to the radiator support, that’s what holds the front end together.

Maybe not. But, the x bracing bolts to the bottom of the radiator support in close proximity to where the bumper support bolts up. As an assembly with both pieces, I think they both matter.

BlakeusMaximus · Jun 11, 2018

Now that I think about it it might. Why did you have that off anyways?

JD1964 · Jun 12, 2018

BlakeusMaximus said:
Now that I think about it it might. Why did you have that off anyways?

Got the car that way. Previous owners had taken stuff off

Davedacarpainter · Jun 12, 2018

This won’t be real helpful, but boy is that a pretty car!

Are you going to get rid of your SFCs and get full length ones?

JD1964 · Jun 12, 2018

Davedacarpainter said:
This won’t be real helpful, but boy is that a pretty car!

Are you going to get rid of your SFCs and get full length ones?

Actually, that was helpful

Not sure If I'm gonna upgrade to the full length SFC's

Next...project stiffin up

JD1964

there is enough sticking out to grab on to

Mustang5L5

That is…until I whipped out my Bissell

JD1964

there is enough sticking out to grab on to

JD1964

there is enough sticking out to grab on to

BlakeusMaximus

Still got to try a little lube on my speedo head

JD1964

there is enough sticking out to grab on to

BlakeusMaximus

Still got to try a little lube on my speedo head

JD1964

there is enough sticking out to grab on to

Davedacarpainter

Chicks can make things hard if they’re inspired...

JD1964

there is enough sticking out to grab on to

Similar threads

Next...project stiffin up

there is enough sticking out to grab on to

That is…until I whipped out my Bissell

there is enough sticking out to grab on to

there is enough sticking out to grab on to

Still got to try a little lube on my speedo head

there is enough sticking out to grab on to

Still got to try a little lube on my speedo head

there is enough sticking out to grab on to

Chicks can make things hard if they’re inspired...

there is enough sticking out to grab on to

Similar threads

Privacy & Transparency

Privacy & Transparency